digplanet beta 1: Athena
Share digplanet:


Applied sciences






















Thiol with a blue-highlighted sulfhydryl group.

In organic chemistry, a thiol (/ˈθˌɔːl/, /ˈθˌɒl/)[1] is an organosulfur compound that contains a carbon-bonded sulfhydryl (–C–SH or R–SH) group (where R represents an alkane, alkene, or other carbon-containing group of atoms). Thiols are the sulfur analogue of alcohols (that is, sulfur takes the place of oxygen in the hydroxyl group of an alcohol), and the word is a portmanteau of "thion" + "alcohol," with the first word deriving from Greek θεῖον ("thion") = "sulfur."[note 1] The –SH functional group itself is referred to as either a thiol group or a sulfhydryl group.

Many thiols have strong odors resembling that of garlic. Thiols are used as odorants to assist in the detection of natural gas (which in pure form is odorless), and the "smell of natural gas" is due to the smell of the thiol used as the odorant.

Thiols are often referred to as mercaptans.[3][4] The term mercaptan /mərˈkæptæn/[5] was introduced in 1832 by William Christopher Zeise and is derived from the Latin mercurium captans (capturing mercury)[6] because the thiolate group bonds very strongly with mercury compounds.[7] Thiols react with mercury to form mercaptides.[8]

Structure and bonding[edit]

Thiols and alcohols have similar molecular structure. The major difference is the size of the chalcogenide, C–S bond lengths being around 180 picometers in length and C-O bond lengths being around 143 picometers in length. The C–S–H angles approach 90°. In the solid or molten liquids, the hydrogen-bonding between individual thiol groups is weak, the main cohesive force being van der Waals interactions between the highly polarizable divalent sulfur centers.

Due to the lesser electronegativity difference between sulfur and hydrogen compared to oxygen and hydrogen, an S–H bond is less polar than the hydroxyl group. Thiols have a lower dipole moment relative to the corresponding alcohol


There are several ways to name the alkylthiols:

  • The suffix -thiol is added to the name of the alkane. This method is nearly identical to naming an alcohol and is used by the IUPAC. Example: CH3SH would be methanethiol.
  • The word mercaptan replaces alcohol in the name of the equivalent alcohol compound. Example: CH3SH would be methyl mercaptan, just as CH3OH is called methyl alcohol.
  • The term sulfanyl or mercapto is used as a prefix. Example: mercaptopurine.

Physical properties[edit]


Many thiols have strong odors resembling that of garlic. The odors of thiols are often strong and repulsive, in particular for those of low molecular weight. The spray of skunks consists mainly of low-molecular-weight thiols and derivatives.[9][10][11][12][13] These compounds are detectable by the human nose at concentrations of only 10 parts per billion.[14] Human sweat contains (R)/(S)-3-methyl-3-sulfanylhexan-1-ol (MSH), detectable at 2 parts per billion and having a fruity, onion-like odor. Women emit significantly more MSH than men.[15] (Methylthio)methanethiol (MeSCH2SH; MTMT) is a strong-smelling volatile thiol, also detectable at parts per billion levels, found in male mouse urine. Lawrence C. Katz and co-workers showed that MTMT functioned as a semiochemical, activating certain mouse olfactory sensory neurons, attracting female mice.[16] Copper has been shown to be required by a specific mouse olfactory receptor, MOR244-3, which is highly responsive to MTMT as well as to various other thiols and related compounds.[17]

Thiols are also responsible for a class of wine faults caused by an unintended reaction between sulfur and yeast and the "skunky" odor of beer that has been exposed to ultraviolet light.

Not all thiols have unpleasant odors. For example, furan-2-ylmethanethiol contributes to the aroma of roasted coffee, whereas grapefruit mercaptan, a monoterpenoid thiol, is responsible for the characteristic scent of grapefruit. The effect of the latter compound is present only at low concentrations. The pure mercaptan has an unpleasant odor.

Natural gas distributors were required to add thiols, originally ethanethiol, to natural gas (which is naturally odorless) after the deadly New London School explosion in New London, Texas, in 1937. Many gas distributors were odorizing gas prior to this event. Most gas odorants utilized currently contain mixtures of mercaptans and sulfides, with t-butyl mercaptan as the main odor constituent. In situations where thiols are used in commercial industry, such as liquid petroleum gas tankers and bulk handling systems, an oxidizing catalyst is used to destroy the odor. A copper-based oxidation catalyst neutralizes the volatile thiols and transforms them into inert products.

Boiling points and solubility[edit]

Thiols show little association by hydrogen bonding, with both water molecules and among themselves. Hence, they have lower boiling points and are less soluble in water and other polar solvents than alcohols of similar molecular weight. For this reason also, thiols and corresponding thioether functional group isomers have similar solubility characteristics and boiling points, whereas the same is not true of alcohols and their corresponding isomeric ethers.


Volatile thiols are easily and almost unerringly detected by their distinctive odor. S-specific analyzers for gas chromatographs are useful. Spectroscopic indicators are the D2O-exchangeable SH signal in the 1H NMR spectrum (33S is NMR active but signals for divalent sulfur are very broad and of little utility[18]). The νSH band appears near 2400 cm−1 in the IR spectrum.[3] In the nitroprusside reaction, free thiol groups react with sodium nitroprusside and ammonium hydroxide to give a red colour.


In industry, methanethiol is prepared by the reaction of hydrogen sulfide with methanol. This method is employed for the industrial synthesis of methanethiol:

CH3OH + H2S → CH3SH + H2O

Such reactions are conducted in the presence of acidic catalysts. The other principal route to thiols involves the addition of hydrogen sulfide to alkenes. Such reactions are usually conducted in the presence of an acid catalyst or UV light. Halide displacement, using the suitable organic halide and sodium hydrogen sulfide has also been utilized.[19]

Another method entails the alkylation of sodium hydrosulfide.

RX + NaSH → RSH + NaX (X = Cl, Br, I)

This method is used for the production of thioglycolic acid from chloroacetic acid.

Laboratory methods[edit]

In general, on the typical laboratory scale, the direct reaction of a halogenoalkane with sodium hydrosulfide is inefficient owing to the competing formation of thioethers Instead, alkyl halides are converted to thiols via a S-alkylation of thiourea. This multistep, one-pot process proceeds via the intermediacy of the isothiouronium salt, which is hydrolyzed in a separate step:[20]

CH3CH2Br + SC(NH2)2 → [CH3CH2SC(NH2)2]Br
[CH3CH2SC(NH2)2]Br + NaOH → CH3CH2SH + OC(NH2)2 + NaBr

The thiourea route works well with primary halides, especially activated ones. Secondary and tertiary thiols are less easily prepared. Secondary thiols can be prepared from the ketone via the corresponding dithioketals.[21] A related two-step process involves alkylation of thiosulfate to give the thiosulfonate ("Bunte salt"), followed by hydrolysis. The method is illustrated by one synthesis of thioglycolic acid:

ClCH2CO2H + Na2S2O3 → Na[O3S2CH2CO2H] + NaCl
Na[O3S2CH2CO2H] + H2O → HSCH2CO2H + NaHSO4

Organolithium compounds and Grignard reagents react with sulfur to give the thiolates, which are readily hydrolyzed:[22]

RLi + S → RSLi
RSLi + HCl → RSH + LiCl

Phenols can be converted to the thiophenols via rearrangement of their O-aryl dialkylthiocarbamates.[23]

Many thiols are prepared by reductive dealkylation of thioethers, especially benzyl derivatives and thioacetals.[24]


Akin to the chemistry of alcohols, thiols form thioethers, thioacetals, and thioesters, which are analogous to ethers, acetals, and esters respectively. Thiols and alcohols are also very different in their reactivity, thiols being more easily oxidized than alcohols. Thiolates are more potent nucleophiles than the corresponding alkoxides.


Thiols, or more specific their conjugate bases, are readily alkylated to give thioethers:

RSH + R'Br + base → RSR' + [Hbase]Br


Relative to the alcohols, thiols are more acidic. The conjugate base of a thiol is called a thiolate. Butanethiol has a pKa of 10.5 vs 15 for butanol. Thiophenol has a pKa of 6 vs 10 for phenol. Thus, thiolates can be obtained from thiols by treatment with alkali metal hydroxides.

Synthesis of thiophenolate from thiophenol


Thiols, especially in the presence of base, are readily oxidized by reagents such as iodine to give an organic disulfide (R–S–S–R).

2 R–SH + Br2 → R–S–S–R + 2 HBr

Oxidation by more powerful reagents such as sodium hypochlorite or hydrogen peroxide can also yield sulfonic acids (RSO3H).

R–SH + 3H2O2 → RSO3H + 3H2O

Oxidation can also be affected by oxygen in the presence of catalysts:[25]

2R–SH + 1/2O2 → RS–SR + H2O

Thiols participate in thiol-disulfide exchange:

RS–SR + 2 R'SH → 2 RSH + R'S–SR'

This reaction is important in nature.

Metal ion complexation[edit]

With metal ions, thiolates behave as ligands to form transition metal thiolate complexes. The term mercaptan is derived from the Latin mercurium captans (capturing mercury)[6] because the thiolate group bonds so strongly with mercury compounds. According to Hard/Soft Acid/Base (HSAB) theory, sulfur is a relatively soft (polarizable) atom. This explains the tendency of thiols to bind to soft elements/ions such as mercury, lead, or cadmium. The stability of metal thiolates parallels that of the corresponding sulfide minerals.

Thiyl radicals[edit]

For the chemistry of the SH radical, see Sulfanyl.
The catalytic cycle for ribonucleotide reductase, demonstrating the role of thiyl radicals in producing the genetic machinery of life.

Free radicals derived from mercaptans, called thiyl or thiol radical or mercapto radical, are commonly invoked to explain reactions in organic chemistry and biochemistry. They have the formula RS where R is an organic substituent such as alkyl or aryl.[4] They arise from or can be generated by a number of routes, but the principal method is H-atom abstraction from thiols. Another method involves homolysis of organic disulfides.[26] In biology thiyl radicals are responsible for the formation of the deoxyribonucleic acids, building blocks for DNA. This conversion is catalysed by ribonucleotide reductase (see figure).[27] Thiyl intermediates also are produced by the oxidation of glutathione, an antioxidant in biology. Thiyl radicals are also intermediates in the vulcanization process. For example, the vulcanization of polyisoprene results when mercapto radicals couple forming disulfide and polysulfide crosslinks. Thiyl radicals (sulfur-centred) can transform to carbon-centred radicals via hydrogen atom exchange equilibria. The formation of carbon-centred radicals could lead to protein damage via the formation of C—C bonds or backbone fragmentation.[28]

Biological importance[edit]

Cysteine and cystine[edit]

As the functional group of the amino acid cysteine, the thiol group plays a very important role in biology. When the thiol groups of two cysteine residues (as in monomers or constituent units) are brought near each other in the course of protein folding, an oxidation reaction can generate a cystine unit with a disulfide bond (-S-S-). Disulfide bonds can contribute to a protein's tertiary structure if the cysteines are part of the same peptide chain, or contribute to the quaternary structure of multi-unit proteins by forming fairly strong covalent bonds between different peptide chains. A physical manifestation of cysteine-cystine equilibrium is provided by hair straightening technologies.[29]

Sulfhydryl groups in the active site of an enzyme can form noncovalent bonds with the enzyme's substrate as well, contributing to covalent catalytic activity in catalytic triads. Active site cysteine residues are the functional unit in cysteine protease catalytic triads. Cysteine residues may also react with heavy metal ions (Zn2+, Cd2+, Pb2+, Hg2+, Ag+) because of the high affinity between the soft sulfide and the soft metal (see hard and soft acids and bases). This can deform and inactivate the protein, and is one mechanism of heavy metal poisoning.


Many cofactors (non-protein-based helper molecules) feature thiols. The biosynthesis and degradation of fatty acids and related long-chain hydrocarbons is conducted on a scaffold that anchors the growing chain through a thioester derived from the thiol Coenzyme A. The biosynthesis of methane, the principal hydrocarbon on Earth, arises from the reaction mediated by coenzyme M, 2-mercaptoethyl sulfonic acid. Thiolates, the conjugate bases derived from thiols, form strong complexes with many metal ions, especially those classified as soft. The stability of metal thiolates parallels that of the corresponding sulfide minerals.

Examples of thiols[edit]

See also[edit]


  1. ^ The Greek adjective theios, a, on (θεῖος, α, ον) means "divine",[2] but appears as a noun to mean "brimstone" in the Bible (c.f. Luke 17:29 "ἔβρεξεν πῦρ καὶ θεῖον ἀπ' οὐρανοῦ καὶ ἀπώλεσεν πάντας." ("it rained fire and sulfur from the sky, and destroyed them all."), brimstone being an alternative name for sulfur.


  1. ^ Dictionary Reference: thiol
  2. ^ θεῖος. Liddell, Henry George; Scott, Robert; A Greek–English Lexicon at the Perseus Project
  3. ^ a b Patai, Saul “The chemistry of the thiol group” Saul Patai, Ed. Wiley, London, 1974. ISBN 0-471-66949-0.
  4. ^ a b R. J. Cremlyn “An Introduction to Organosulfur Chemistry” John Wiley and Sons: Chichester (1996). ISBN 0-471-95512-4.
  5. ^ Dictionary Reference: mercaptan
  6. ^ a b Oxford American Dictionaries (Mac OS X Leopard).
  7. ^ "Mercaptan" (ethyl thiol) was discovered in 1834 by the Danish professor of chemistry William Christopher Zeise (1789–1847). He called it "mercaptan", a contraction of "corpus mercurium captans" (mercury-capturing substance) [p. 88], because it reacted violently with mercury (II) oxide ("deutoxide de mercure") [p. 92]. See:
  8. ^ Vibrant Life Magazine, Loren K. "Sulfer & Mercury". 
  9. ^ Andersen K. K., Bernstein D. T. (1978). "Some Chemical Constituents of the Scent of the Striped Skunk (Mephitis mephitis)". Journal of Chemical Ecology 1 (4): 493–499. doi:10.1007/BF00988589. 
  10. ^ Andersen K. K., Bernstein D. T.; Bernstein (1978). "1-Butanethiol and the Striped Skunk". Journal of Chemical Education 55 (3): 159–160. Bibcode:1978JChEd..55..159A. doi:10.1021/ed055p159. 
  11. ^ Andersen K. K., Bernstein D. T., Caret R. L., Romanczyk L. J., Jr. (1982). "Chemical Constituents of the Defensive Secretion of the Striped Skunk (Mephitis mephitis)". Tetrahedron 38 (13): 1965–1970. doi:10.1016/0040-4020(82)80046-X. 
  12. ^ Wood W. F., Sollers B. G., Dragoo G. A., Dragoo J. W. (2002). "Volatile Components in Defensive Spray of the Hooded Skunk, Mephitis macroura". Journal of Chemical Ecology 28 (9): 1865–70. doi:10.1023/A:1020573404341. PMID 12449512. 
  13. ^ William F. Wood. "Chemistry of Skunk Spray". Dept. of Chemistry, Humboldt State University. Retrieved January 2, 2008. 
  15. ^ Troccaz, Myriam; Borchard, Gerrit; Vuilleumier, Christine; Raviot-Derrien, Sophie; Niclass, Yvan; Beccucci, Sabine; Starkenmann, Christian (2009). "Gender-Specific Differences between the Concentrations of Nonvolatile (R)/(S)-3-Methyl-3-sulfanylhexan-1-ol and (R)/(S)-3-Hydroxy-3-methylhexanoic Acid Odor Precursors in Axillary Secretions". Chem. Senses 34 (3): 203–210. doi:10.1093/chemse/bjn076. PMID 19147808. 
  16. ^ Lin, DaYu; Zhang, Shaozhong; Block, Eric; Katz, Lawrence C (2005). "Encoding social signals in the mouse main olfactory bulb". Nature 2005 (434): 470–477. Bibcode:2005Natur.434..470L. doi:10.1038/nature03414. 
  17. ^ Duan, Xufang; Block, Eric; Li, Zhen; Connelly, Timothy; Zhang, Jian; Huang, Zhimin; Su, Xubo; Pan, Yi; et al. (2012). "Crucial role of copper in detection of metal-coordinating odorants". Proc. Natl. Acad. Sci. U.S.A 2012 (109): 3492–3497. Bibcode:2012PNAS..109.3492D. doi:10.1073/pnas.1111297109. PMC 3295281. PMID 22328155. 
  18. ^ http://www.pascal-man.com/periodic-table/sulfur.shtml
  19. ^ John S Roberts, "Thiols", in Kirk-Othmer Encyclopedia of Chemical Technology, 1997, Wiley-VCH, Weinheim. doi:10.1002/0471238961.2008091518150205.a01
  20. ^ Speziale, A. J. (1963). "Ethanedithiol". Org. Synth. ; Coll. Vol. 4, p. 401 .
  21. ^ S. R. Wilson, G. M. Georgiadis (1990). "Mecaptans from Thioketals: Cyclododecyl Mercaptan". Org. Synth. ; Coll. Vol. 7, p. 124 .
  22. ^ E. Jones and I. M. Moodie (1990). "2-Thiophenethiol". Org. Synth. ; Coll. Vol. 6, p. 979 .
  23. ^ Melvin S. Newman and Frederick W. Hetzel (1990). "Thiophenols from Phenols: 2-Naphthalenethiol". Org. Synth. ; Coll. Vol. 6, p. 824 .
  24. ^ Ernest L. Eliel, Joseph E. Lynch, Fumitaka Kume, and Stephen V. Frye (1993). "Chiral 1,3-oxathiane from (+)-Pulegone: Hexahydro-4,4,7-trimethyl-4H-1,3-benzoxathiin". Org. Synth. ; Coll. Vol. 8, p. 302 
  25. ^ Heterogeneous catalytic demercaptization of light hydrocarbon feedstock. A. G. Akhmadullina, B. V. Kizhaev, G. M. Nurgalieva, I. K. Khrushcheva and A. S. Shabaeva, et al. Chemistry and Technology of Fuels and Oils, 1993, Volume 29, Number 3, Pages 108–109
  26. ^ Kathrin-Maria Roy "Thiols and Organic sulphides" in Ullmann's Encyclopedia of Industrial Chemistry 2002, Wiley-VCH Verlag, Weinheim. doi:10.1002/14356007.a26_767
  27. ^ JoAnne Stubbe, Daniel G. Nocera, Cyril S. Yee, Michelle C. Y. Chang "Radical Initiation in the Class I Ribonucleotide Reductase:  Long-Range Proton-Coupled Electron Transfer?" Chem. Rev 2003, 103 (6), pp 2167–2202. doi:10.1021/cr020421u
  28. ^ Dustin Hofstetter, Thomas Nauser, and Willem H. Koppenol "Hydrogen Exchange Equilibria in Glutathione Radicals: Rate Constants" Chem. Res. Toxicol. 2010; 23 (10), pp 1596–1600, doi:10.1021/tx100185k
  29. ^ Reece, Urry, et al. Campbell Biology, Ninth Edition. Pearson Benjamin Cummings, New York. 2011. Print. Pg 65, 83.

External links[edit]

Original courtesy of Wikipedia: http://en.wikipedia.org/wiki/Thiol — Please support Wikipedia.
This page uses Creative Commons Licensed content from Wikipedia. A portion of the proceeds from advertising on Digplanet goes to supporting Wikipedia.

712 news items

MaterialsViews (press release) (registration)

MaterialsViews (press release) (registration)
Mon, 23 Nov 2015 23:30:00 -0800

Torbati and Mather developed their synthesis of liquid crystalline hydrogels using thiol-ene chemistry. Thiol-ene reactions have high yields, stereoselectivity, and are driven by thermodynamics, which classifies them as “click” chemistry. In the ...

MaterialsViews (press release) (registration)

MaterialsViews (press release) (registration)
Mon, 23 Nov 2015 09:15:00 -0800

Chien-Chi Lin and co-workers at Indiana University-Purdue University Indianapolis (USA) have previously developed a gelation method based on thiol-acrylate photopolymerization to fabricate dually degradable (i.e., proteolytic and hydrolytic) hydrogels.


Thu, 09 Jul 2015 05:01:02 -0700

Native and total thiol were deficient in the hyperemesis gravidarum group and this deficiency was correlated with the severity of the disease. The thiol-disulfide balance has shifted to the oxidative side. This metabolic disturbance may have a role in ...

Royal Society of Chemistry

Royal Society of Chemistry
Thu, 05 Nov 2015 04:11:15 -0800

'[So far] this has really been limited to thiols … because we can put a single cysteine residue into our pore, and the side chain of cysteine contains a thiol group,' says Bayley. In order to study other reactions, Bayley and colleague Joongoo Lee had ...

Daily Mail

Daily Mail
Fri, 06 Nov 2015 05:27:06 -0800

If it doesn't back off, the aggressor could face a rapid-fire attack and be hit by five quick sprays of liquid composed of three types of sulphurous compounds: (E)-2-butene-1-thiol, 3-methyl-1-butanethiol, and 2-phenylethanethiol. It takes a skunk ...


Mon, 02 Nov 2015 06:30:13 -0800

Finally, to understand how thermal fluctuations at room temperature affect molecular distances, Funke and Dietz looked at chemical crosslinking reactions of thiol groups. The thiol groups were placed fifteen base pairs away from the vertex angle and ...


Fri, 13 Nov 2015 06:26:15 -0800

Sensor chips currently use two types of linking layer technology that were developed more than 20 years ago and are based either on a layer of self-assembled thiol molecules, or a layer of hydrogel (usually carboxymethyl dextran). The profit that ...


Tue, 29 Sep 2015 23:01:42 -0700

The thiol-ene photopolymerization of AxT (x=6 or 8), S3I and SQ at an allyl/SH ratio of 1/1 yielded a photo-cured AxT/S3I/SQ hybrid nanocomposite with an SQ content of y wt% (AxT–S3T/SQy, y=10 or 20). A typical synthetic procedure for A6T–S3I/SQ10 is ...

Oops, we seem to be having trouble contacting Twitter

Support Wikipedia

A portion of the proceeds from advertising on Digplanet goes to supporting Wikipedia. Please add your support for Wikipedia!

Searchlight Group

Digplanet also receives support from Searchlight Group. Visit Searchlight