The Rotary Engine - History, Theory, Configuration, Construction

An informative video, originally produced in the 1970's. The rotary engine, in my opinion, was one of the greatest breakthroughs in automotive engineering hi...

How to Make Stirling Engine - Single Cylinder Tomato Can (Homemade/DIY)

How to make a Stirling engine using a tomato paste can and other household items. This is a single cylinder design or beta configuration. I start out with an...

Miniature free-piston engine compressor no load running

A miniature free-piston engine compressor is being developed in Center for Compact and Efficient Fluid Power at Univeristy of Minnesota. A miniature internal...

Stirling engine

Simple Stirling engine in beta configuration, ie both displacer piston and power piston running in the same cylinder. Made from 50 mm ID smooth bore hydrauli...

Boxer / Flat Engine Configuration 3d Rendering

Supplementary video for our Building Blocks Series articles teaching you everything there is to know about engine systems, how they work and how they integra...

The Correct Way to Point Piston Arrow On A 2 Cycle engine

Correct Way to Point Piston Arrow On A 2 Cycle engine. It is very important to do this when reassembling any 2 cycle engine. If there is no arrow on your pis...

MYT Engine Demonstration at LA Auto Show

http://www.americanantigravity.com - A hand-cranked MYT engine prototype is demonstrated at the Los Angeles auto-show, shown in an open-configuration to demo...

Cylider sleeves

Cylider sleeves.

[SUBARU] FB engine -The 3rd Generation SUBARU BOXER

The horizontally-opposed configuration of the SUBARU BOXER engine places the pistons 180 degrees apart, for a lower, flatter profile than other engine types....

Fast and Hot! Miniature Hot Air Engine

Miniature hot air engine running. http://www.moneryengines.co.uk Miniature hot air engines built by Peter Monery, a retired engineer and hot air engine enthu...