Part of Raptor's layout
|Opening date||April 1, 2011|
|Type||Steel – Wing Coaster|
|Manufacturer||Bolliger & Mabillard|
|Lift/launch system||Chain lift hill|
|Height||108.3 ft (33.0 m)|
|Length||2,526.3 ft (770.0 m)|
|Speed||90 km/h (56 mph)|
|Inversions||3 (Corkscrew, Zero-G Roll, Inline Twist)|
|Duration||1 minute and 30 seconds|
|Max vertical angle||65°|
|Trains||2 trains with 7 cars. Riders are arranged 4 across in a single row for a total of 28 riders per train.|
Single rider line available
|Raptor at RCDB
Pictures of Raptor at RCDB
Raptor is a steel roller coaster at the Gardaland amusement park in Lake Garda, Italy. The ride is a prototype Wing Coaster design by Swiss roller coaster manufacturer Bolliger & Mabillard. Raptor opened to the public on April 1, 2011. The ride begins from an underground station and features two water splash elements. The layout features several roll overs. The trains hang over the track like X2 at Six Flags Magic Mountain but do not spin.
Ride experience 
After departing from the underground station, the train makes a left turn into the lift hill. After reaching the top of the 108.3-foot (33.0 m) lift, the train drops back to the ground before making a sharp left over-banked turn. The train then enters a corkscrew followed by a slight upward left turn. Next, the train goes back down slightly, also going through a set of trim brakes. The train then makes another sharp left turn leading into a 55.8-foot (17.0 m) zero-gravity-roll. After a sharp left turn, and right turn, the train enters a 32.8-foot (10.0 m) inline twist, going through the supports of the track, a fake tree and a steel rectangle. The train then makes a left turn into the final brake run where the train then enters the station and the next riders board.
The ride lasts about 1 minute and 30 seconds.