digplanet beta 1: Athena
Share digplanet:

Agriculture

Applied sciences

Arts

Belief

Chronology

Culture

Education

Environment

Geography

Health

History

Humanities

Language

Law

Life

Mathematics

Nature

People

Politics

Science

Society

Technology

In probability and statistics, a probability distribution assigns a probability to each measurable subset of the possible outcomes of a random experiment, survey, or procedure of statistical inference. Examples are found in experiments whose sample space is non-numerical, where the distribution would be a categorical distribution; experiments whose sample space is encoded by discrete random variables, where the distribution can be specified by a probability mass function; and experiments with sample spaces encoded by continuous random variables, where the distribution can be specified by a probability density function. More complex experiments, such as those involving stochastic processes defined in continuous time, may demand the use of more general probability measures.

In applied probability, a probability distribution can be specified in a number of different ways, often chosen for mathematical convenience:

A probability distribution can either be univariate or multivariate. A univariate distribution gives the probabilities of a single random variable taking on various alternative values; a multivariate distribution (a joint probability distribution) gives the probabilities of a random vector—a set of two or more random variables—taking on various combinations of values. Important and commonly encountered univariate probability distributions include the binomial distribution, the hypergeometric distribution, and the normal distribution. The multivariate normal distribution is a commonly encountered multivariate distribution.

## Introduction

The probability mass function (pmf) p(S) specifies the probability distribution for the sum S of counts from two dice. For example, the figure shows that p(11) = 1/18. The pmf allows the computation of probabilities of events such as P(S > 9) = 1/12 + 1/18 + 1/36 = 1/6, and all other probabilities in the distribution.

To define probability distributions for the simplest cases, one needs to distinguish between discrete and continuous random variables. In the discrete case, one can easily assign a probability to each possible value: for example, when throwing a die, each of the six values 1 to 6 has the probability 1/6. In contrast, when a random variable takes values from a continuum, probabilities are nonzero only if they refer to finite intervals: in quality control one might demand that the probability of a "500 g" package containing between 490 g and 510 g should be no less than 98%.

The probability density function (pdf) of the normal distribution, also called Gaussian or "bell curve", the most important continuous random distribution. As notated on the figure, the probabilities of intervals of values corresponds to the area under the curve.

If the random variable is real-valued (or more generally, if a total order is defined for its possible values), the cumulative distribution function (CDF) gives the probability that the random variable is no larger than a given value; in the real-valued case, the CDF is the integral of the probability density function (pdf) provided that this function exists.

## Terminology

As probability theory is used in quite diverse applications, terminology is not uniform and sometimes confusing. The following terms are used for non-cumulative probability distribution functions:

The following terms are somewhat ambiguous as they can refer to non-cumulative or cumulative distributions, depending on authors' preferences:

• Probability distribution function: continuous or discrete, non-cumulative or cumulative.
• Probability function: even more ambiguous, can mean any of the above or other things.

Finally,

• Probability distribution: sometimes the same as probability distribution function, but usually refers to the more complete assignment of probabilities to all measurable subsets of outcomes, not just to specific outcomes or ranges of outcomes.

### Basic terms

• Mode: for a discrete random variable, the value with highest probability (the location at which the probability mass function has its peak); for a continuous random variable, the location at which the probability density function has its peak.
• Support: the smallest closed set whose complement has probability zero.
• Head: the range of values where the pmf or pdf is relatively high.
• Tail: the complement of the head within the support; the large set of values where the pmf or pdf is relatively low.
• Expected value or mean: the weighted average of the possible values, using their probabilities as their weights; or the continuous analog thereof.
• Median: the value such that the set of values less than the median has a probability of one-half.
• Variance: the second moment of the pmf or pdf about the mean; an important measure of the dispersion of the distribution.
• Standard deviation: the square root of the variance, and hence another measure of dispersion.
• Symmetry: a property of some distributions in which the portion of the distribution to the left of a specific value is a mirror image of the portion to its right.
• Skewness: a measure of the extent to which a pmf or pdf "leans" to one side of its mean.

## Cumulative distribution function

Because a probability distribution Pr on the real line is determined by the probability of a scalar random variable X being in a half-open interval (-∞, x], the probability distribution is completely characterized by its cumulative distribution function:

$F(x) = \Pr \left[ X \le x \right] \qquad \text{ for all } x \in \mathbb{R}.$

## Discrete probability distribution

The probability mass function of a discrete probability distribution. The probabilities of the singletons {1}, {3}, and {7} are respectively 0.2, 0.5, 0.3. A set not containing any of these points has probability zero.
The cdf of a discrete probability distribution, ...
... of a continuous probability distribution, ...
... of a distribution which has both a continuous part and a discrete part.

A discrete probability distribution shall be understood as a probability distribution characterized by a probability mass function. Thus, the distribution of a random variable X is discrete, and X is then called a discrete random variable, if

$\sum_u \Pr(X=u) = 1$

as u runs through the set of all possible values of X. It follows that such a random variable can assume only a finite or countably infinite number of values. For the number of potential values to be countably infinite even though their probabilities sum to 1 requires that the probabilities decline to zero fast enough: for example, if $\Pr(X=n) = \tfrac{1}{2^n}$ for n = 1, 2, ..., we have the sum of probabilities 1/2 + 1/4 + 1/8 + ... = 1.

In cases more frequently considered, this set of possible values is a topologically discrete set in the sense that all its points are isolated points. But there are discrete random variables for which this countable set is dense on the real line (for example, a distribution over rational numbers).

Among the most well-known discrete probability distributions that are used for statistical modeling are the Poisson distribution, the Bernoulli distribution, the binomial distribution, the geometric distribution, and the negative binomial distribution. In addition, the discrete uniform distribution is commonly used in computer programs that make equal-probability random selections between a number of choices.

### Cumulative density

Equivalently to the above, a discrete random variable can be defined as a random variable whose cumulative distribution function (cdf) increases only by jump discontinuities—that is, its cdf increases only where it "jumps" to a higher value, and is constant between those jumps. The points where jumps occur are precisely the values which the random variable may take.

### Delta-function representation

Consequently, a discrete probability distribution is often represented as a generalized probability density function involving Dirac delta functions, which substantially unifies the treatment of continuous and discrete distributions. This is especially useful when dealing with probability distributions involving both a continuous and a discrete part.

### Indicator-function representation

For a discrete random variable X, let u0, u1, ... be the values it can take with non-zero probability. Denote

$\Omega_i=\{\omega: X(\omega)=u_i\},\, i=0, 1, 2, \dots$

These are disjoint sets, and by formula (1)

$\Pr\left(\bigcup_i \Omega_i\right)=\sum_i \Pr(\Omega_i)=\sum_i\Pr(X=u_i)=1.$

It follows that the probability that X takes any value except for u0, u1, ... is zero, and thus one can write X as

$X=\sum_i u_i 1_{\Omega_i}$

except on a set of probability zero, where $1_A$ is the indicator function of A. This may serve as an alternative definition of discrete random variables.

## Continuous probability distribution

A continuous probability distribution is a probability distribution that has a probability density function. Mathematicians also call such a distribution absolutely continuous, since its cumulative distribution function is absolutely continuous with respect to the Lebesgue measure λ. If the distribution of X is continuous, then X is called a continuous random variable. There are many examples of continuous probability distributions: normal, uniform, chi-squared, and others.

Intuitively, a continuous random variable is the one which can take a continuous range of values — as opposed to a discrete distribution, where the set of possible values for the random variable is at most countable. While for a discrete distribution an event with probability zero is impossible (e.g. rolling 3½ on a standard die is impossible, and has probability zero), this is not so in the case of a continuous random variable. For example, if one measures the width of an oak leaf, the result of 3½ cm is possible, however it has probability zero because there are uncountably many other potential values even between 3 cm and 4 cm. Each of these individual outcomes has probability zero, yet the probability that the outcome will fall into the interval (3 cm, 4 cm) is nonzero. This apparent paradox is resolved by the fact that the probability that X attains some value within an infinite set, such as an interval, cannot be found by naively adding the probabilities for individual values. Formally, each value has an infinitesimally small probability, which statistically is equivalent to zero.

Formally, if X is a continuous random variable, then it has a probability density function ƒ(x), and therefore its probability of falling into a given interval, say [a, b] is given by the integral

$\Pr[a\le X\le b] = \int_a^b f(x) \, dx$

In particular, the probability for X to take any single value a (that is aXa) is zero, because an integral with coinciding upper and lower limits is always equal to zero.

The definition states that a continuous probability distribution must possess a density, or equivalently, its cumulative distribution function be absolutely continuous. This requirement is stronger than simple continuity of the cumulative distribution function, and there is a special class of distributions, singular distributions, which are neither continuous nor discrete nor a mixture of those. An example is given by the Cantor distribution. Such singular distributions however are never encountered in practice.

Note on terminology: some authors use the term "continuous distribution" to denote the distribution with continuous cumulative distribution function. Thus, their definition includes both the (absolutely) continuous and singular distributions.

By one convention, a probability distribution $\,\mu$ is called continuous if its cumulative distribution function $F(x)=\mu(-\infty,x]$ is continuous and, therefore, the probability measure of singletons $\mu\{x\}\,=\,0$ for all $\,x$.

Another convention reserves the term continuous probability distribution for absolutely continuous distributions. These distributions can be characterized by a probability density function: a non-negative Lebesgue integrable function $\,f$ defined on the real numbers such that

$F(x) = \mu(-\infty,x] = \int_{-\infty}^x f(t)\,dt.$

Discrete distributions and some continuous distributions (like the Cantor distribution) do not admit such a density.

## Some properties

• The probability distribution of the sum of two independent random variables is the convolution of each of their distributions.
• Probability distributions are not a vector space—they are not closed under linear combinations, as these do not preserve non-negativity or total integral 1—but they are closed under convex combination, thus forming a convex subset of the space of functions (or measures).

## Kolmogorov definition

In the measure-theoretic formalization of probability theory, a random variable is defined as a measurable function X from a probability space $\scriptstyle (\Omega, \mathcal{F}, \operatorname{P})$ to measurable space $\scriptstyle (\mathcal{X},\mathcal{A})$. A probability distribution is the pushforward measure, P, satisfying X*P = PX −1 on $\scriptstyle (\mathcal{X},\mathcal{A})$.[clarification needed]

## Random number generation

A frequent problem in statistical simulations (the Monte Carlo method) is the generation of pseudo-random numbers that are distributed in a given way. Most algorithms are based on a pseudorandom number generator that produces numbers X that are uniformly distributed in the interval [0,1). These random variates X are then transformed via some algorithm to create a new random variate having the required probability distribution.

## Applications

The concept of the probability distribution and the random variables which they describe underlies the mathematical discipline of probability theory, and the science of statistics. There is spread or variability in almost any value that can be measured in a population (e.g. height of people, durability of a metal, sales growth, traffic flow, etc.); almost all measurements are made with some intrinsic error; in physics many processes are described probabilistically, from the kinetic properties of gases to the quantum mechanical description of fundamental particles. For these and many other reasons, simple numbers are often inadequate for describing a quantity, while probability distributions are often more appropriate.

As a more specific example of an application, the cache language models and other statistical language models used in natural language processing to assign probabilities to the occurrence of particular words and word sequences do so by means of probability distributions.

## Common probability distributions

The following is a list of some of the most common probability distributions, grouped by the type of process that they are related to. For a more complete list, see list of probability distributions, which groups by the nature of the outcome being considered (discrete, continuous, multivariate, etc.)

Note also that all of the univariate distributions below are singly peaked; that is, it is assumed that the values cluster around a single point. In practice, actually observed quantities may cluster around multiple values. Such quantities can be modeled using a mixture distribution.

## References

 198157 videos foundNext >
 Introductory Statistics - Chapter 5: Probability distributionsA video summary of chapter 5 in Perdisco's Introductory Statistics 360Textbook. To find out more, visit www.perdisco.com/introstats. Introduction to discrete probability distributionsVisualizing a simple discrete probability distribution (probability mass function) Lecture4 Normal Probability Distribution Statistics 101: Uniform Probability DistributionsStatistics 101: Uniform Probability Distributions In this video we learn about discrete and continuous probability distributions. Several examples are provid... Constructing a Probability Distribution Table : ExamSolutionsGo to http://www.examsolutions.net/maths-revision/index.php to see the main index of maths video tutorials. The Binomial Distribution / Binomial Probability FunctionThe Binomial Distribution / Binomial Probability Function. In this video, I discuss what a binomial experiment is, discuss the formula for finding the probab... Stats: Binomial Probability Distribution (Part 1)Binomial Probability Distribution defined. Demonstrates how to find the probability of exactly "x" number of success. (Part 1) An Introduction to Continuous Probability DistributionsAn introduction to continuous random variables and continuous probability distributions. I briefly discuss the probability density function (pdf), the proper... Continuous probability distribution introExploring continuous probability distributions (probability density functions) The Mean (expected value) of a Discrete Probability DistributionThe mean of a discrete probability distribution is all so know as the expected value. The expected value has wonderful application to a wide variety of field...
 198157 videos foundNext >
 36 news items
 Too optimistic too often Financial Mail Wed, 12 Jun 2013 23:51:47 -0700 Though the margin of error seems large, since 2008 actual GDP growth has been within the 90% probability distribution around the Bank's central forecast except for the period from the third quarter of 2008 to the second quarter of 2009. This partly ... Why We Keep Having 100-Year Floods Quality Digest Mon, 03 Jun 2013 20:05:14 -0700 A Poisson probability distribution is commonly used to model the number of hurricanes. Since the Poisson model only has one parameter, we only need to compute the average number of hurricanes per year to fit a Poisson distribution to the histogram of ... SA appears ill-prepared for end of Fed liquidity era Independent Online Wed, 12 Jun 2013 23:03:57 -0700 That said, the key take away is a full understanding now of the reaction function of policymakers to the outlook probability distribution and the complicated subtleties of what is going on in the mining sector. We presented a view for discussion of a ... Modeling the spatial distribution of Chagas disease vectors using ... 7thSpace Interactive (press release) Fri, 31 May 2013 17:33:41 -0700 Presence probability distribution increases from central Chile towards the north, tending to cover the central-coastal region and avoiding areas of the Andes range. Conclusions: The methodology presented here was useful to model the distribution of ... Insight: climate risk analysis for ecosystems environmentalresearchweb Wed, 29 May 2013 02:35:58 -0700 The basic idea is to use the conditional probability distribution P(sys|env) to summarize the uncertain effects of certain environmental variables on any other ecosystem variable. Information can be extracted from this distribution by considering ... Statistical Modeling in Supply Chain Continued: When should we incorporate ... The 21st Century Supply Chain - Perspectives on Innovative (blog) Mon, 10 Jun 2013 06:30:11 -0700 PERT uses beta probability distribution, which in its essence, models the behavior of random variables and can be implemented by either using the statistical probability theory or discrete-event simulation. The way it is used in project management is ... Earthquakes, Patterns and Predictions Wired Thu, 30 May 2013 06:22:51 -0700 First, it isn't a true random probability distribution — that earthquakes are really randomly distributed through time. This is likely due to clusters of foreshocks and aftershocks associated with large earthquakes. Just look at the peak around the M8 ... Doomsday for Hungary's banks at the hands of Matolcsy? Nope. portfolio.hu Mon, 10 Jun 2013 14:57:47 -0700 Probability distribution charts, with beautifully tapered and long tails, demonstrated that mass-scale client default was not a realistic concern. There is shocking data available to show how badly banks have mismanaged risks; for instance, another NBH ...
 Limit to books that you can completely read online Include partial books (book previews) .gsc-branding { display:block; }

Oops, we seem to be having trouble contacting Twitter