digplanet beta 1: Athena
Share digplanet:

Agriculture

Applied sciences

Arts

Belief

Business

Chronology

Culture

Education

Environment

Geography

Health

History

Humanities

Language

Law

Life

Mathematics

Nature

People

Politics

Science

Society

Technology

Fuel rail connected to the injectors that are mounted just above the intake manifold on a four-cylinder engine.

Fuel injection is a system for admitting fuel into an internal combustion engine. It has become the primary fuel delivery system used in automotive engines, having replaced carburetors during the 1980s and 1990s. A variety of injection systems have existed since the earliest usage of the internal combustion engine.

The primary difference between carburetors and fuel injection is that fuel injection atomizes the fuel by forcibly pumping it through a small nozzle under high pressure, while a carburetor relies on suction created by intake air accelerated through a Venturi tube to draw the fuel into the airstream.

Modern fuel injection systems are designed specifically for the type of fuel being used. Some systems are designed for multiple grades of fuel (using sensors to adapt the tuning for the fuel currently used). Most fuel injection systems are for gasoline or diesel applications.

Objectives[edit]

The functional objectives for fuel injection systems can vary. All share the central task of supplying fuel to the combustion process, but it is a design decision how a particular system is optimized. There are several competing objectives such as:

  • Power output
  • Fuel efficiency
  • Emissions performance
  • Ability to accommodate alternative fuels
  • Reliability
  • Driveability and smooth operation
  • Initial cost
  • Maintenance cost
  • Diagnostic capability
  • Range of environmental operation
  • Engine tuning

The modern digital electronic fuel injection system is more capable at optimizing these competing objectives consistently than earlier fuel delivery systems (such as carburetors). Carburetors have the potential to atomize fuel better (see Pogue and Allen Caggiano patents).[dubious ]

Benefits[edit]

Driver benefits[edit]

Operational benefits to the driver of a fuel-injected car include smoother and more dependable engine response during quick throttle transitions, easier and more dependable engine starting, better operation at extremely high or low ambient temperatures, smoother engine idle and running, increased maintenance intervals, and increased fuel efficiency. On a more basic level, fuel injection does away with the choke, which on carburetor-equipped vehicles must be operated when starting the engine from cold and then adjusted as the engine warms up.

Environmental benefits[edit]

Fuel injection generally increases engine fuel efficiency. With the improved cylinder-to-cylinder fuel distribution of multi-point fuel injection, less fuel is needed for the same power output (when cylinder-to-cylinder distribution varies significantly, some cylinders receive excess fuel as a side effect of ensuring that all cylinders receive sufficient fuel).

Exhaust emissions are cleaner because the more precise and accurate fuel metering reduces the concentration of toxic combustion byproducts leaving the engine, and because exhaust cleanup devices such as the catalytic converter can be optimized to operate more efficiently since the exhaust is of consistent and predictable composition.

History and development[edit]

Herbert Akroyd Stuart developed the first device with a design similar to modern fuel injection[citation needed], using a 'jerk pump' to meter out fuel oil at high pressure to an injector. This system was used on the hot bulb engine and was adapted and improved by Bosch and Clessie Cummins for use on diesel engines (Rudolf Diesel's original system employed a cumbersome 'air-blast' system using highly compressed air[citation needed]). Fuel injection was in widespread commercial use in diesel engines by the mid-1920s.

An early use of indirect gasoline injection dates back to 1902, when French aviation engineer Leon Levavasseur pioneered it on his Antoinette 8V aircraft powerplant.[1]

Another early use of gasoline direct injection (i.e. injection of gasoline, also known as petrol) was on the Hesselman engine invented by Swedish engineer Jonas Hesselman in 1925.[2][3] Hesselman engines use the ultra lean burn principle; fuel is injected toward the end of the compression stroke, then ignited with a spark plug. They are often started on gasoline and then switched to diesel or kerosene.[4]

Direct fuel injection was used in notable World War II aero-engines such as the Junkers Jumo 210, the Daimler-Benz DB 601, the BMW 801, the Shvetsov ASh-82FN (M-82FN). German direct injection petrol engines used injection systems developed by Bosch from their diesel injection systems. Later versions of the Rolls-Royce Merlin and Wright R-3350 used single point fuel injection, at the time called "Pressure Carburettor". Due to the wartime relationship between Germany and Japan, Mitsubishi also had two radial aircraft engines utilizing fuel injection, the Mitsubishi Kinsei (kinsei means "venus") and the Mitsubishi Kasei (kasei means "mars").

Alfa Romeo tested one of the very first electronic injection systems (Caproni-Fuscaldo) in Alfa Romeo 6C2500 with "Ala spessa" body in 1940 Mille Miglia. The engine had six electrically operated injectors and were fed by a semi-high-pressure circulating fuel pump system.[5]

Development in diesel engines[edit]

All diesel engines (with the exception of some tractors and scale model engines have fuel injected into the combustion chamber. See diesel engines.

Development in gasoline/petrol engines[edit]

Mechanical injection[edit]

An Antoinette mechanically fuel-injected V8 aviation engine of 1909, mounted in a preserved Antoinette VII monoplane aircraft.

The invention of mechanical injection for gasoline-fueled aviation engines was by the French inventor of the V8 engine configuration, Leon Levavasseur in 1902.[6] Levavasseur designed the original Antoinette firm's series of V-form aero engines, starting with the Antoinette 8V to be used by the aircraft the Antoinette firm built that Levavasseur also designed, flown from 1906 to the firm's demise in 1910, with the world's first V16 engine, using Levavasseur's direct injection and producing some 100 hp, flying an Antoinette VII monoplane in 1907.

The first post-World War I example of direct gasoline injection was on the Hesselman engine invented by Swedish engineer Jonas Hesselman in 1925.[7][8] Hesselman engines used the ultra lean burn principle and injected the fuel in the end of the compression stroke and then ignited it with a spark plug, it was often started on gasoline and then switched over to run on diesel or kerosene. The Hesselman engine was a low compression design constructed to run on heavy fuel oils.

Direct gasoline injection was applied during the Second World War to almost all higher-output production aircraft powerplants made in Germany (the widely used BMW 801 radial, and the popular inverted inline V12 Daimler-Benz DB 601, DB 603 and DB 605, along with the similar Junkers Jumo 210G, Jumo 211 and Jumo 213, starting as early as 1937 for both the Jumo 210G and DB 601), the Soviet Union (Shvetsov ASh-82FN radial, 1943, Chemical Automatics Design Bureau - KB Khimavtomatika) and the USA (Wright R-3350 Duplex Cyclone radial, 1944).

Immediately following the war, hot rodder Stuart Hilborn started to offer mechanical injection for race cars, salt cars, and midgets,[9] well-known and easily distinguishable because of their prominent velocity stacks projecting upwards from the engine they were used on.

The first automotive direct injection system used to run on gasoline was developed by Bosch, and was introduced by Goliath for their Goliath GP700 automobile, and Gutbrod in 1952. This was basically a high-pressure diesel direct-injection pump with an intake throttle valve set up. (Diesels only change the amount of fuel injected to vary output; there is no throttle.) This system used a normal gasoline fuel pump, to provide fuel to a mechanically driven injection pump, which had separate plungers per injector to deliver a very high injection pressure directly into the combustion chamber. The 1954 Mercedes-Benz W196 Formula 1 racing car engine used Bosch direct injection derived from wartime aero engines. Following this racetrack success, the 1955 Mercedes-Benz 300SL, the first production sports car to use fuel injection, used direct injection. The same engine was used in the Mercedes-Benz 300SLR famously driven by Stirling Moss to victory in the 1955 Mille Miglia. The Bosch fuel injectors were placed into the bores on the cylinder wall used by the spark plugs in other Mercedes-Benz six-cylinder engines (the spark plugs were relocated to the cylinder head). Later, more mainstream applications of fuel injection favored the less-expensive indirect injection methods.

Chevrolet introduced a mechanical fuel injection option, made by General Motors' Rochester Products division, for its 283 V8 engine in 1956 (1957 US model year). This system directed the inducted engine air across a "spoon shaped" plunger that moved in proportion to the air volume. The plunger connected to the fuel metering system that mechanically dispensed fuel to the cylinders via distribution tubes. This system was not a "pulse" or intermittent injection, but rather a constant flow system, metering fuel to all cylinders simultaneously from a central "spider" of injection lines. The fuel meter adjusted the amount of flow according to engine speed and load, and included a fuel reservoir, which was similar to a carburetor's float chamber. With its own high-pressure fuel pump driven by a cable from the distributor to the fuel meter, the system supplied the necessary pressure for injection. This was a "port" injection where the injectors are located in the intake manifold, very near the intake valve.

During the 1960s, other mechanical injection systems such as Hilborn were occasionally used on modified American V8 engines in various racing applications such as drag racing, oval racing, and road racing.[10] These racing-derived systems were not suitable for everyday street use, having no provisions for low speed metering, or often none even for starting (starting required that fuel be squirted into the injector tubes while cranking the engine). However, they were a favorite in the aforementioned competition trials in which essentially wide-open throttle operation was prevalent. Constant-flow injection systems continue to be used at the highest levels of drag racing, where full-throttle, high-RPM performance is key.[11]

Another mechanical system, made by Bosch called Jetronic, but injecting the fuel into the port above the intake valve, was used by several European car makers, particularly Porsche from 1969 until 1973 in the 911 production range and until 1975 on the Carrera 3.0 in Europe. Porsche continued using this system on its racing cars into the late seventies and early eighties. Porsche racing variants such as the 911 RSR 2.7 & 3.0, 904/6, 906, 907, 908, 910, 917 (in its regular normally aspirated or 5.5 Liter/1500 HP Turbocharged form), and 935 all used Bosch or Kugelfischer built variants of injection. The early Bosch Jetronic systems were also used by Audi, Volvo, BMW, Volkswagen, and many others. The Kugelfischer system was also used by the BMW 2000/2002 Tii and some versions of the Peugeot 404/504 and Lancia Flavia. Lucas also offered a mechanical system that was used by some Maserati, Aston Martin, and Triumph models between 1963 and 1973.

A system similar to the Bosch inline mechanical pump was built by SPICA for Alfa Romeo, used on the Alfa Romeo Montreal and on U.S. market 1750 and 2000 models from 1969 to 1981. This was designed to meet the U.S. emission requirements with no loss in performance and it also reduced fuel consumption.

Electronic injection[edit]

The first commercial electronic fuel injection (EFI) system was Electrojector, developed by the Bendix Corporation and was offered by American Motors Corporation (AMC) in 1957.[12][13] The Rambler Rebel, showcased AMC's new 327 cu in (5.4 L) engine. The Electrojector was an option and rated at 288 bhp (214.8 kW).[14] The EFI produced peak torque 500 rpm lower than the equivalent carburetored engine[10] The Rebel Owners Manual described the design and operation of the new system.[15] (due to cooler, therefore denser, intake air[citation needed]). The cost of the EFI option was US$395 and it was available on 15 June 1957.[16] Electrojector's teething problems meant only pre-production cars were so equipped: thus, very few cars so equipped were ever sold[17] and none were made available to the public.[18] The EFI system in the Rambler ran fine in warm weather, but suffered hard starting in cooler temperatures.[16]

Chrysler offered Electrojector on the 1958 Chrysler 300D, DeSoto Adventurer, Dodge D-500 and Plymouth Fury, arguably the first series-production cars equipped with an EFI system. It was jointly engineered by Chrysler and Bendix. The early electronic components were not equal to the rigors of underhood service, however, and were too slow to keep up with the demands of "on the fly" engine control. Most of the 35 vehicles originally so equipped were field-retrofitted with 4-barrel carburetors. The Electrojector patents were subsequently sold to Bosch.

Bosch developed an electronic fuel injection system, called D-Jetronic (D for Druck, German for "pressure"), which was first used on the VW 1600TL/E in 1967. This was a speed/density system, using engine speed and intake manifold air density to calculate "air mass" flow rate and thus fuel requirements. This system was adopted by VW, Mercedes-Benz, Porsche, Citroën, Saab, and Volvo. Lucas licensed the system for production with Jaguar.

Bosch superseded the D-Jetronic system with the K-Jetronic and L-Jetronic systems for 1974, though some cars (such as the Volvo 164) continued using D-Jetronic for the following several years. In 1970, the Isuzu 117 Coupé was introduced with a Bosch-supplied D-Jetronic fuel injected engine sold only in Japan.

Chevrolet Cosworth Vega engine showing Bendix electronic fuel injection (in orange).

In Japan, the Toyota Celica used electronic, multi-port fuel injection in the optional 18R-E engine in January 1974.[19] Nissan offered electronic, multi-port fuel injection in 1975 with the Bosch L-Jetronic system used in the Nissan L28E engine and installed in the Nissan Fairlady Z, Nissan Cedric, and the Nissan Gloria. Nissan also installed multi-point fuel injection in the Nissan Y44 V8 engine in the Nissan President. Toyota soon followed with the same technology in 1978 on the 4M-E engine installed in the Toyota Crown, the Toyota Supra, and the Toyota Mark II. In the 1980s, the Isuzu Piazza, and the Mitsubishi Starion added fuel injection as standard equipment, developed separately with both companies history of diesel powered engines. 1981 saw Mazda offer fuel injection in the Mazda Luce with the Mazda FE engine, and in 1983, Subaru offered fuel injection in the Subaru EA81 engine installed in the Subaru Leone. Honda followed in 1984 with their own system, called PGM-FI in the Honda Accord, and the Honda Vigor using the Honda ES3 engine.

The limited production Chevrolet Cosworth Vega was introduced in March 1975 using a Bendix EFI system with pulse-time manifold injection, four injector valves, an electronic control unit (ECU), five independent sensors and two fuel pumps. The EFI system was developed to satisfy stringent emission control requirements and market demands for a technologically advanced responsive vehicle. 5000 hand-built Cosworth Vega engines were produced but only 3,508 cars were sold through 1976.[20]

The Cadillac Seville was introduced in 1975 with an EFI system made by Bendix and modelled very closely on Bosch's D-Jetronic. L-Jetronic first appeared on the 1974 Porsche 914, and uses a mechanical airflow meter (L for Luft, German for "air") that produces a signal that is proportional to "air volume". This approach required additional sensors to measure the atmospheric pressure and temperature, to ultimately calculate "air mass". L-Jetronic was widely adopted on European cars of that period, and a few Japanese models a short time later.

In 1980, Motorola (now Freescale) introduced the first electronic engine control unit, the EEC-III.[21] Its integrated control of engine functions (such as fuel injection and spark timing) is now the standard approach for fuel injection systems. The Motorola technology was installed in Ford North American products.

Supersession of carburetors[edit]

In the 1970s and 1980s in the US and Japan, the respective federal governments imposed increasingly strict exhaust emission regulations. During that time period, the vast majority of gasoline-fueled automobile and light truck engines did not use fuel injection. To comply with the new regulations, automobile manufacturers often made extensive and complex modifications to the engine carburetor(s). While a simple carburetor system is cheaper to manufacture than a fuel injection system, the more complex carburetor systems installed on many engines in the 1970s were much more costly than the earlier simple carburetors. To more easily comply with emissions regulations, automobile manufacturers began installing fuel injection systems in more gasoline engines during the late 1970s.

The open loop fuel injection systems had already improved cylinder-to-cylinder fuel distribution and engine operation over a wide temperature range, but did not offer further scope to sufficient control fuel/air mixtures, in order to further reduce exhaust emissions. Later Closed loop fuel injection systems improved the air/fuel mixture control with an exhaust gas oxygen sensor and began incorporating a catalytic converter to further reduce exhaust emissions.

Fuel injection was phased in through the latter 1970s and 80s at an accelerating rate, with the German, French, and U.S. markets leading and the UK and Commonwealth markets lagging somewhat. Since the early 1990s, almost all gasoline passenger cars sold in first world markets are equipped with electronic fuel injection (EFI). The carburetor remains in use in developing countries where vehicle emissions are unregulated and diagnostic and repair infrastructure is sparse. Fuel injection is gradually replacing carburetors in these nations too as they adopt emission regulations conceptually similar to those in force in Europe, Japan, Australia, and North America.

Many motorcycles still utilize carburetored engines, though all current high-performance designs have switched to EFI.

NASCAR finally replaced carburetors with fuel-injection, starting at the beginning of the 2012 NASCAR Sprint Cup Series season.[22][23][24]

System components[edit]

System overview[edit]

The process of determining the necessary amount of fuel, and its delivery into the engine, are known as fuel metering. Early injection systems used mechanical methods to meter fuel, while nearly all modern systems use electronic metering.

Determining how much fuel to supply[edit]

The primary factor used in determining the amount of fuel required by the engine is the amount (by weight) of air that is being taken in by the engine for use in combustion. Modern systems use a mass airflow sensor to send this information to the engine control unit.

Data representing the amount of power output desired by the driver (sometimes known as "engine load") is also used by the engine control unit in calculating the amount of fuel required. A throttle position sensor (TPS) provides this information. Other engine sensors used in EFI systems include a coolant temperature sensor, a camshaft or crankshaft position sensor (some systems get the position information from the distributor), and an oxygen sensor which is installed in the exhaust system so that it can be used to determine how well the fuel has been combusted, therefore allowing closed loop operation.

Supplying the fuel to the engine[edit]

Fuel is transported from the fuel tank (via fuel lines) and pressurised using fuel pump(s). Maintaining the correct fuel pressure is done by a fuel pressure regulator. Often a fuel rail is used to divide the fuel supply into the required number of cylinders. The fuel injector injects liquid fuel into the intake air (the location of the fuel injector varies between systems).

EFI gasoline engine components[edit]

Note: These examples specifically apply to a modern EFI gasoline engine. Parallels to fuels other than gasoline can be made, but only conceptually.

Animated cut through diagram of a typical fuel injector. Click to see animation.
  • Injectors
  • Fuel Pump
  • Fuel Pressure Regulator
  • Engine control unit
  • Wiring Harness
  • Various Sensors (Some of the sensors required are listed here.)

Engine control unit[edit]

Main article: engine control unit

The engine control unit is central to an EFI system. The ECU interprets data from input sensors to, among other tasks, calculate the appropriate amount of fuel to inject.

Fuel injector[edit]

When signalled by the engine control unit the fuel injector opens and sprays the pressurised fuel into the engine. The duration that the injector is open (called the pulse width) is proportional to the amount of fuel delivered. Depending on the system design, the timing of when injector opens is either relative each individual cylinder (for a sequential fuel injection system), or injectors for multiple cylinders may be signalled to open at the same time (in a batch fire system).

Target air/fuel ratios[edit]

The relative proportions of air and fuel vary according to the type of fuel used and the performance requirements (i.e. power, fuel economy, or exhaust emissions).

See air-fuel ratio, stoichiometry, and combustion.

Various injection schemes[edit]

Single-point injection[edit]

Single-point injection uses a single injector at the throttle body (the same location as was used by carburetors).

It was introduced in the 1940s in large aircraft engines (then called the pressure carburetor) and in the 1980s in the automotive world (called Throttle-body Injection by General Motors, Central Fuel Injection by Ford, PGM-CARB by Honda, and EGI by Mazda). Since the fuel passes through the intake runners (like a carburetor system), it is called a "wet manifold system".

The justification for single-point injection was low cost. Many of the carburetor's supporting components- such as the air cleaner, intake manifold, and fuel line routing- could be reused. This postponed the redesign and tooling costs of these components. Single-point injection was used extensively on American-made passenger cars and light trucks during 1980-1995, and in some European cars in the early and mid-1990s.

Continuous injection[edit]

In a continuous injection system, fuel flows at all times from the fuel injectors, but at a variable flow rate. This is in contrast to most fuel injection systems, which provide fuel during short pulses of varying duration, with a constant rate of flow during each pulse. Continuous injection systems can be multi-point or single-point, but not direct.

The most common automotive continuous injection system is Bosch's K-Jetronic, introduced in 1974. K-Jetronic was used for many years between 1974 and the mid-1990s by BMW, Lamborghini, Ferrari, Mercedes-Benz, Volkswagen, Ford, Porsche, Audi, Saab, DeLorean, and Volvo. Chrysler used a continuous fuel injection system on the 1981-1983 Imperial.

In piston aircraft engines, continuous-flow fuel injection is the most common type. In contrast to automotive fuel injection systems, aircraft continuous flow fuel injection is all mechanical, requiring no electricity to operate. Two common types exist: the Bendix RSA system, and the TCM system. The Bendix system is a direct descendant of the pressure carburetor. However, instead of having a discharge valve in the barrel, it uses a flow divider mounted on top of the engine, which controls the discharge rate and evenly distributes the fuel to stainless steel injection lines to the intake ports of each cylinder. The TCM system is even more simple. It has no venturi, no pressure chambers, no diaphragms, and no discharge valve. The control unit is fed by a constant-pressure fuel pump. The control unit simply uses a butterfly valve for the air, which is linked by a mechanical linkage to a rotary valve for the fuel. Inside the control unit is another restriction, which controls the fuel mixture. The pressure drop across the restrictions in the control unit controls the amount of fuel flow, so that fuel flow is directly proportional to the pressure at the flow divider. In fact, most aircraft that use the TCM fuel injection system feature a fuel flow gauge that is actually a pressure gauge calibrated in gallons per hour or pounds per hour of fuel.

Central port injection[edit]

From 1992 to 1996 General Motors implemented a system called Central Port Injection or Central Port Fuel Injection. The system uses tubes with poppet valves from a central injector to spray fuel at each intake port rather than the central throttle-body[citation needed]. Fuel pressure is similar to a single-point injection system. CPFI (used from 1992 to 1995) is a batch-fire system, while CSFI (from 1996) is a sequential system.[25]

Multiport fuel injection[edit]

Multiport fuel injection injects fuel into the intake ports just upstream of each cylinder's intake valve, rather than at a central point within an intake manifold. MPFI (or just MPI) systems can be sequential, in which injection is timed to coincide with each cylinder's intake stroke; batched, in which fuel is injected to the cylinders in groups, without precise synchronization to any particular cylinder's intake stroke; or simultaneous, in which fuel is injected at the same time to all the cylinders. The intake is only slightly wet, and typical fuel pressure runs between 40-60 psi.

Many modern EFI systems utilize sequential MPFI; however, in newer gasoline engines, direct injection systems are beginning to replace sequential ones.

Direct injection[edit]

See also: Common rail

In a direct injection engine, fuel is injected into the combustion chamber as opposed to injection before the intake valve (petrol engine) or a separate pre-combustion chamber (diesel engine).[26]

In a common rail system, the fuel from the fuel tank is supplied to the common header (called the accumulator). This fuel is then sent through tubing to the injectors, which inject it into the combustion chamber. The header has a high pressure relief valve to maintain the pressure in the header and return the excess fuel to the fuel tank. The fuel is sprayed with the help of a nozzle that is opened and closed with a needle valve, operated with a solenoid. When the solenoid is not activated, the spring forces the needle valve into the nozzle passage and prevents the injection of fuel into the cylinder. The solenoid lifts the needle valve from the valve seat, and fuel under pressure is sent in the engine cylinder. Third-generation common rail diesels use piezoelectric injectors for increased precision, with fuel pressures up to 1,800 bar or 26,000 psi.

Direct fuel injection costs more than indirect injection systems: the injectors are exposed to more heat and pressure, so more costly materials and higher-precision electronic management systems are required.

Diesel engines[edit]

Most diesel engines (with the exception of some tractors and scale model engines) have fuel injected into the combustion chamber.

Earlier systems, relying on simpler injectors, often injected into a sub-chamber shaped to swirl the compressed air and improve combustion; this was known as indirect injection. However, this was less efficient than the now common direct injection in which initiation of combustion takes place in a depression (often toroidal) in the crown of the piston.

Throughout the early history of diesels, they were always fed by a mechanical pump with a small separate chamber for each cylinder, feeding separate fuel lines and individual injectors.[citation needed] Most such pumps were in-line, though some were rotary.

Most modern diesel engines use common rail or unit injector direct injection systems.

Gasoline engines[edit]

Modern gasoline engines also utilise direct injection, which is referred to as gasoline direct injection. This is the next step in evolution from multi-point fuel injection, and offers another magnitude of emission control by eliminating the "wet" portion of the induction system along the inlet tract.

By virtue of better dispersion and homogeneity of the directly injected fuel, the cylinder and piston are cooled, thereby permitting higher compression ratios and earlier ignition timing, with resultant enhanced power output. More precise management of the fuel injection event also enables better control of emissions. Finally, the homogeneity of the fuel mixture allows for leaner air/fuel ratios, which together with more precise ignition timing can improve fuel efficiency. Along with this, the engine can operate with stratified (lean burn) mixtures, and hence avoid throttling losses at low and part engine load. Some direct-injection systems incorporate piezoelectronic fuel injectors. With their extremely fast response time, multiple injection events can occur during each cycle of each cylinder of the engine.

Swirl injection[edit]

Swirl injectors are used in liquid rocket, gas turbine, and diesel engines to improve atomization and mixing efficiency.

The circumferential velocity component is first generated as the propellant enters through helical or tangential inlets producing a thin, swirling liquid sheet. A gas-filled hollow core is then formed along the centerline inside the injector due to centrifugal force of the liquid sheet. Because of the presence of the gas core, the discharge coefficient is generally low. In swirl injector, the spray cone angle is controlled by the ratio of the circumferential velocity to the axial velocity and is generally wide compared with nonswirl injectors.[27]

Maintenance hazards[edit]

Fuel injection introduces potential hazards in engine maintenance due to the high fuel pressures used. Residual pressure can remain in the fuel lines long after an injection-equipped engine has been shut down. This residual pressure must be relieved, and if it is done so by external bleed-off, the fuel must be safely contained. If a high-pressure diesel fuel injector is removed from its seat and operated in open air, there is a risk to the operator of injury by hypodermic jet-injection, even with only 100 psi (6.9 bar) pressure.[28] The first known such injury occurred in 1937 during a diesel engine maintenance operation.[29]

Notes[edit]

  1. ^ Hartmann, Gerard (2007-08-05). "Les moteurs et aéroplanes Antoinette" [Antoinette engines and aeroplanes] (PDF) (in French). hydroretro.net. Retrieved 2014-01-20. 
  2. ^ Lindh, Björn-Eric (1992). Scania fordonshistoria 1891-1991 (in Swedish). Streiffert. ISBN 978-91-7886-074-6. 
  3. ^ Olsson, Christer (1990). Volvo – Lastbilarna igår och idag (in Swedish). Förlagshuset Norden. ISBN 978-91-86442-76-7. 
  4. ^ "The Direct Injection Engine Will Likely Power Your Next Car". HybridKingdom.com. 2009. Retrieved 2014-01-20. 
  5. ^ "1940 6C 2500 Touring "Ala Spessa"" (in Italian). digilander.libero.it. Retrieved 2014-01-20. 
  6. ^ Gerard Hartmann (2007-08-05). "Les moteurs et aéroplanes Antoinette" [Antoinette engines and aeroplanes] (PDF) (in French). Retrieved 2014-04-08. 
  7. ^ Lindh, Björn-Eric (1992). Scania fordonshistoria 1891-1991 (Scania: vehicle history 1891-1991) (in Swedish). Streiffert. ISBN 91-7886-074-1. 
  8. ^ Olsson, Christer (1987). Volvo – Lastbilarna igår och idag (Volvo – the trucks yesterday and today) (in Swedish). Norden. ISBN 91-86442-76-7. 
  9. ^ Circle Track, 9/84, pp.82-3.
  10. ^ a b Walton, Harry (1957-03). "How Good is Fuel Injection?". Popular Science 170 (3): 88–93. Retrieved 2014-01-20. 
  11. ^ Davis, Marlan (2010-10). "What You Need To Know About Mechanical Fuel Injection". Hot Rod Magazine. Retrieved 2014-01-20. 
  12. ^ Ingraham, Joseph C. (1957-03-24). "Automobiles: Races; Everybody Manages to Win Something At the Daytona Beach Contests". The New York Times. p. 153. Retrieved 2014-01-20. 
  13. ^ Consumer Reports 22: 154. 1957. 
  14. ^ Holder, William; Kunz, Phil (2006). Extreme Muscle Cars: The Factory Lightweight Legacy. Krause Publications. p. 16. ISBN 978-0-89689-278-1. Retrieved 2014-01-20. 
  15. ^ "An Invitation to Happy Motoring... (Excerpts from the 1957 Rambler Rebel Owner's Manual)". AMX-files.com. Archived from the original on 2009-03-28. Retrieved 2014-01-20. 
  16. ^ a b Auto Editors of Consumer Guide (2007-08-22). "Rambler Measures Up". Retrieved 2014-01-20. 
  17. ^ Aird, Forbes (2001). Bosch fuel injection systems. HP Trade. p. 29. ISBN 978-1-55788-365-0. 
  18. ^ Kendall, Leslie. "American Musclecars: Power to the People". Petersen Automotive Museum. Archived from the original on 2011-10-27. Retrieved 2014-01-20. 
  19. ^ "Celica Parts Catalogue" (in Japanese). Toyota. Retrieved 2014-01-20. 
  20. ^ 1975 Chevrolet Cosworth Vega Overhaul Supplement - general information
  21. ^ "A Timeline Overview of Motorola History 1928-2009". Motorola. Archived from the original on 2011-06-20. Retrieved 2014-01-20. 
  22. ^ Ryan, Nate (2011-11-02). "NASCAR sets fuel injection for '12 but keeping restrictor plates". USA Today. Retrieved 2014-01-20. 
  23. ^ "NASCAR Moves to Fuel Injection, Bosch First Approved Supplier". Auto Service World. 2011-07-18. Retrieved 2014-01-20. 
  24. ^ "Bosch to provide oxygen sensors for fuel injection". NASCAR.com. Archived from the original on 2011-12-25. Retrieved 2014-01-20. 
  25. ^ 1997 Chevrolet Truck Service Manual, page 6A-24, drawing, item (3) Central Sequential Muliport injector.
  26. ^ "IC Engines". Global Fuel Economy Initiative. Retrieved 2012-04-13. [dead link]
  27. ^ Ji-Hyuk, Im; Seongho, Cho; Youngbin, Yoon; Insang, Moon (2010). "Comparative Study of Spray Characteristics of Gas-Centered and Liquid-Centered Swirl Coaxial Injectors". Journal of Propulsion and Power. 
  28. ^ Agha, F.P. (1978). "High-pressure paint gun injuries of hand: clinical and roentgen aspects". NY State Journal of Medicine 78: 1955–6. 
  29. ^ Rees, C.E. (1937). "Penetration of Tissue by Fuel Oil Under High Pressure from a Diesel Engine". Journal of the American Medical Association 109 (11): 866–7. doi:10.1001/jama.1937.92780370004012c. 

Further reading[edit]

Patents

External links[edit]


Original courtesy of Wikipedia: http://en.wikipedia.org/wiki/Fuel_injection — Please support Wikipedia.
This page uses Creative Commons Licensed content from Wikipedia. A portion of the proceeds from advertising on Digplanet goes to supporting Wikipedia.
635939 videos foundNext > 

Carburetor vs Fuel Injection - Summit Racing 101

What is the difference between a carburetor and fuel injection? Listen as Dave guides you through 2 barrel carbs, spread bore carbs, race carbs and compares ...

Fuel Injection - Explained

How does fuel injection work? Everything you need to know about fuel injection! Throttle body injection, multipoint port injection, and direct injection. Inj...

Electronic Fuel Injection System Working

This video is the working principle animation of electronic fuel injection system. It gives the clear idea about how to work a fuel injection system.

Electronic Fuel Injection

The story from Carburetor to electronic fuel injection.

The quick and easy approach to electronic fuel injection with the FAST EZ-EFI system

When shying away from swapping their carburetor for electronic fuel injection on a classic musclecar, enthusiasts often cite the painstaking installation tim...

curso basico fuel injection parte 1

curso basico de fuel injection sistema obd I y II y como seleccionar el mejor scanner de diagnostico automotriz.

Diagnostico del sistema fuel injection vw sedan

GDI vs PFI Fuel Injection

GDI vs PFI Fuel Injection Get the Amazon Printed Books: http://www.amazon.com/GDI-Gasoline-Direct-Injection-Explained/dp/1480088897/ref=sr_1_1?s=books&ie=UTF...

Tested: Edelbrock's All New E-Street EFI Fuel Injection System

Carburetors are great if you want horsepower and old school looks on your classic car. But drivability and fuel economy sometimes requires a conversion to EF...

Fuel Injector Operation

Fuel Injector Operation Details the operation of the automotive fuel injector. Goes into how to test the fuel injector, theory of operation and other aspects...

635939 videos foundNext > 

1010 news items

 
Hartford Business
Mon, 21 Jul 2014 03:07:30 -0700

(Right) The Stanadyne leadership team of (from left) CEO David Galuska, President John Pinson, and Executive Chairman Robert Isaman. (Top left) Parts for a Stanadyne fuel injection system. (Middle left) The research and development lab at Stanadyne's ...
 
just-auto.com (subscription)
Mon, 30 Jun 2014 01:48:45 -0700

Continuing just-auto's series of interviews with tier one manufacturers, Matthew Beecham spoke to James Zizelman, engineering director gasoline powertrain, Delphi about fuel injection systems and Andrew Lasley, director electronic controls advanced ...

Moto

Moto
Tue, 24 Jun 2014 06:47:44 -0700

Fuel injection first came to dirt bikes when Gas-Gas fuel injected their 450 enduro machine back in 2002. One of the first benefits the enduro guys found was that fuel injected bikes don't flood. You can tip them upside down, red hot – then upright ...
 
Live 5 News
Wed, 23 Jul 2014 14:33:45 -0700

But regular maintenance, like fuel injection cleanings every 30,000 miles, is a much better option, Martinez says. "If you keep up with the maintenance on your car, your car's going to work properly. [If you don't], your car is not going to run in the ...
 
Jacksonville Daily News
Thu, 17 Jul 2014 07:37:30 -0700

... the company's director of the unit tasked with the product line's growth, said the pump marks the next evolutionary stage of automobile engines. Gasoline once entered an engine's compression stroke via carburetors, he explained. Then came fuel ...
 
Forbes
Wed, 23 Jul 2014 11:11:15 -0700

Incredible technologies like multi-point fuel injection, direct injection, extraordinary fuel rail pressures (over 30k psi on some vehicles), variable valve timing, etc. are now reliable and affordable. A lot of interesting ideas – like the rotary ...

AEG India

Indian Cars Bikes
Mon, 30 Jun 2014 01:19:18 -0700

Yamaha has launched the new FZ and FZ-S Version 2.0 commuter bike in India. The 150cc bikes get smaller engines, lesser outputs, fuel injection and many more changes. The 2014 Yamaha FZ is priced at Rs. 76,250 and the FZ-S is priced at Rs. 78,250.

Forbes

Forbes
Tue, 22 Jul 2014 10:26:15 -0700

The key words here are reducing friction, efficient thermal management and optimized combustion,” he said. “Our conclusion: At present and for the foreseeable future, the diesel engine with direct fuel injection is the engine with the highest thermal ...
Loading

Oops, we seem to be having trouble contacting Twitter

Talk About Fuel injection

You can talk about Fuel injection with people all over the world in our discussions.

Support Wikipedia

A portion of the proceeds from advertising on Digplanet goes to supporting Wikipedia. Please add your support for Wikipedia!