Decimal time is the representation of the time of day using units which are decimally related. This term is often used to refer specifically to French Revolutionary Time, which divides the day into 10 decimal hours, each decimal hour into 100 decimal minutes and each decimal minute into 100 decimal seconds, as opposed to the more familiar standard time, which divides the day into 24 hours, each hour into 60 minutes and each minute into 60 seconds.
The main advantage of a decimal time system is that, since the base used to divide the time is the same as the one used to represent it, the whole time representation can be handled as a single string. Therefore, it becomes simpler to interpret a timestamp and to perform conversions. For instance, 1:23:00 is one decimal hour and 23 decimal minutes, or 1.23 hours, or 123 minutes; 3 hours is 300 minutes or 30,000 seconds. This property also makes it straightforward to represent a timestamp as a fractional day, so that 20140723.534 can be interpreted as five decimal hours and 34 decimal minutes after the start of that date, or 0.534 (53.4%) of a day in that date. It also adjusts well to digital time representation using epochs, in that the internal time representation can be used directly for both computation and for userfacing display.
Contents
History[edit]
China[edit]
Decimal time was used in China throughout most of its history alongside dozenal time. The midnighttomidnight day was divided into both 12 double hours (Traditional Chinese: 時辰; Simplified Chinese: 时辰; Pinyin: shíchen) and 10 shi / 100 ke (Hanzi: 刻; Pinyin: kè) by the 1st millennium BC.^{[1]}^{[2]} Other numbers of ke per day were used during three short periods, 120 ke during 5–3 BC, 96 ke during 507–544, and 108 ke during 544–565. Several of the roughly 50 Chinese calendars also divided each ke into 100 fen, although others divided each ke into 60 fen. In 1280, the Shoushi (Season Granting) calendar further subdivided each fen into 100 miao, creating a complete decimal time system of 100 ke, 100 fen and 100 miao.^{[3]} Chinese decimal time ceased in 1645 when the Shixian (Constant Conformity) calendar, based on European astronomy brought to China by the Jesuits, adopted 96 ke per day alongside 12 double hours, making each ke exactly onequarter hour.^{[4]}
France[edit]
In 1754, Jean le Rond d'Alembert wrote in the Encyclopédie:
 It would be very desirable that all divisions, for example of the livre, the sou, the toise, the day, the hour, etc. would be from tens into tens. This division would result in much easier and more convenient calculations and would be very preferable to the arbitrary division of the livre into twenty sous, of the sou into twelve deniers, of the day into twentyfour hours, the hour into sixty minutes, etc.^{[5]}^{[6]}
In 1788, Claude Boniface Collignon proposed dividing the day into 10 hours or 1000 minutes, each new hour into 100 minutes, each new minute into 1000 seconds, and each new second into 1000 tierces (Latin for "third"). The distance the sun travels in one new tierce at the equator, which is onebillionth of the circumference of the earth, would be a new unit of length, provisionally called a halfhandbreadth, equal to four modern centimeters. Further, the new tierce would be divided into 1000 quatierces, which he called "microscopic points of time". He also suggested a week of 10 days and dividing the year into 10 "solar months".^{[7]}
Decimal time was officially introduced during the French Revolution. JeanCharles de Borda made a proposal for decimal time on November 5, 1792. The National Convention issued a decree on 5 October 1793:
 XI. Le jour, de minuit à minuit, est divisé en dix parties, chaque partie en dix autres, ainsi de suite jusqu’à la plus petite portion commensurable de la durée.
 XI. The day, from midnight to midnight, is divided into ten parts, each part into ten others, so on until the smallest measurable portion of duration.
These parts were named on 24 November 1793 (4 Frimaire of the Year II). The primary divisions were called hours, and they added:
 La centième partie de l'heure est appelée minute décimale; la centième partie de la minute est appelée seconde décimale. (emphasis in original)
 The hundredth part of the hour is called decimal minute; the hundredth part of the minute is called decimal second.
Thus, midnight was called dix heures (10 o'clock), noon was called cinq heures (5 o'clock), etc. Sometimes in official records, decimal hours were divided into tenths, or décimes, instead of minutes.^{[8]}^{[9]} Although clocks and watches were produced with faces showing both standard time with numbers 1–24 and decimal time with numbers 1–10, decimal time never caught on; it was not officially used until the beginning of the Republican year III, 22 September 1794, and mandatory use was suspended 7 April 1795 (18 Germinal of the Year III), in the same law which introduced the original metric system. Thus, although decimal time is sometimes referred to as metric time, the metric system at first had no time unit, and later versions of the metric system used the second, equal to 1/86400 day, as the metric time unit. In spite of this, decimal time was used in many cities, including Marseille and Toulouse, where a decimal clock with just an hour hand was on the front of the Capitole for five years.^{[8]} On the Palace of the Tuileries in Paris, two of the four clock faces displayed decimal time until at least 1801.^{[10]} The mathematician and astronomer PierreSimon Laplace had a decimal watch made for him, and used decimal time in his work.
Decimal time was part of a larger attempt at decimalisation in revolutionary France (which also included decimalisation of currency and metrication) and was introduced as part of the French Republican Calendar, which, in addition to decimally dividing the day, divided the month into three décades of 10 days each; this calendar was abolished at the end of 1805. The start of each year was determined according to which day the autumnal equinox occurred, in relation to true or apparent solar time at the Paris Observatory. Decimal time would also have been reckoned according to apparent solar time, depending on the location it was observed, as was already the practice generally for the setting of clocks.
At the International Meridian Conference of 1884, the following resolution was passed, at the proposal of the French delegation, by unanimous vote (with 3 abstentions):
 VII. That the Conference expresses the hope that the technical studies designed to regulate and extend the application of the decimal system to the division of angular space and of time shall be resumed, so as to permit the extension of this application to all cases in which it presents real advantages.
In the 1890s, Joseph Charles François de ReyPailhade, president of the Toulouse Geographical Society, proposed dividing the day into 100 parts, called cés, equal to 14.4 standard minutes, and divided into 10 decicés, 100 centicés, etc. The Toulouse Chamber of Commerce adopted a resolution supporting his proposal in April 1897. Although widely published, the proposal received little backing.^{[11]}
The French made another attempt at the decimalization of time in 1897, when the Commission de décimalisation du temps was created by the Bureau des Longitudes, with the mathematician Henri Poincaré as secretary. The commission adopted a compromise, originally proposed by Henri de Sarrauton of the Oran Geographical Society, of retaining the 24hour day, but dividing each hour into 100 decimal minutes, and each minute into 100 seconds. The plan did not gain acceptance and was abandoned in 1900.
Conversions[edit]
There are exactly 86,400 standard seconds (see SI for the current definition of the standard second) in a standard day, but in the French decimal time system there are 100,000 decimal seconds in the day, so the decimal second is shorter than its counterpart.
Decimal unit  Seconds  Minutes  Hours  h:mm:ss.sss 

Decimal second  0.864  0.0144  0.00024  0:00:00.864 
Decimal minute  86.4  1.44  0.024  0:01:26.400 
Decimal hour  8,640  144  2.4  2:24:00.000 
Accounting[edit]
Decimal time is commonly used in accounting for payrolls and hourly billing in the form of decimal hours. Time clocks typically record the time of day in tenths or hundredths of an hour. For instance, 8:30 am would be recorded as 08.50. This is intended to make accounting easier by eliminating the need to convert between minutes and hours. Sometimes arrival is rounded up to tenths of hours, and leave rounded down, so workers lose a few minutes per day.
Fractional days[edit]
The most common use of decimal time of day is as fractional days used by scientists and computer programmers. Standard 24hour time is converted into a fractional day simply by dividing the number of hours elapsed since midnight by 24 to make a decimal fraction. Thus, midnight is 0.0 day, noon is 0.5 d, etc., which can be added to any type of date, including (all of which refer to the same moment):
 Gregorian dates: 2000 January 1.5
 Twoline elements: 00001.5
 Julian dates: 2451545.0
 Excel serial dates: 36526.5
As many decimal places may be used as required for precision, so 0.5 d = 0.500000 d. Fractional days are often calculated in UTC or TT, although Julian Dates use pre1925 astronomical date/time (each date began at 0^{h} thus ".0" = noon) and Microsoft Excel uses the local time zone of the computer. Using fractional days reduces the number of units in time calculations from four (days, hours, minutes, seconds) to just one (days).
Fractional days are often used by astronomers to record observations, and were expressed in relation to Paris Mean Time by the 18th century French mathematician and astronomer PierreSimon Laplace, as in these examples:^{[12]}
... et la distance périhélie, égale à 1,053095 ; ce qui a donné pour l'instant du passage au périhélie, sept.29^{j},10239, temps moyen compté de minuit à Paris.
Les valeurs précédentes de a, b, h, l, relatives à trois observations, ont donné la distance périhélie égale à 1,053650; et pour l'instant du passage, sept.29^{j},04587; ce qui diffère peu des résultats fondés sur cinq observations.— PierreSimon Laplace , Traité de Mécanique Céleste
Fractional days have been used by astronomers ever since. For instance, the 19th century British astronomer John Herschel gave these examples:^{[13]}
Between Greenwich noon of the 22d and 23d of March, 1829, the 1828th equinoctial year terminates, and the 1829th commences. This happens at 0^{d}·286003, or at 6^{h} 51^{m} 50^{s}·66 Greenwich Mean Time ... For example, at 12^{h} 0^{m} 0^{s} Greenwich Mean Time, or 0^{d}·500000...
— John Herschel , Outlines of Astronomy
Fractional days are commonly used to express epochs of orbital elements. The decimal fraction is usually added to the calendar date or Julian day for natural objects, or to the ordinal date for artificial satellites in twoline elements.
Decimal multiples and fractions of the second[edit]
The second is the International System of Units (SI) unit of time duration. It is also the standard singleunit time representation in many programming languages, most notably C, and part of UNIX/POSIX standards used by Linux, Mac OS X, etc.; to convert fractional days to fractional seconds, multiply the number by 86400. Fractional seconds are represented as milliseconds (ms), microseconds (μs) or nanoseconds (ns). Absolute times are usually represented relative to 1 January 1970, at midnight. Other systems may use a different zero point.
In principle, time spans greater than one second are given in units such as kiloseconds (ks), megaseconds (Ms), gigaseconds (Gs), and so on. Occasionally, these units can be found in technical literature, but traditional units like minutes, hours, days and years are much more common, and are accepted for use with SI.
It is possible to specify the time of day as the number of kiloseconds elapsed since midnight. Thus, instead of saying 3:45 p.m. one could say (time of day) 56.7 ks. There are exactly 86.4 ks in one day. However, this system is hardly used in practice.
Scientific decimal time[edit]
Scientists often record (rather than observe) time as decimals. For example, decimal days divides the day into 10 equal parts, and decimal years divides the year into 10 equal parts. Decimals are easier to plot than both (a) minutes and seconds, which uses the Sexagesimal numbering system, (b) hours, months and days, which has irregular month lengths. In astronomy, the socalled Julian day uses decimal days centered on noon.
 Seconds in a decimal minute
Since there are 60 seconds in a minute, a tenth part represents 60/10 = 6 seconds.
Conversion between decimal minutes seconds  

Decimal Minutes  0.1  0.2  0.3  0.4  0.5  0.6  0.7  0.8  0.9  1.0  
Second  6s  12s  18s  24s  30s  36s  42s  48s  54s  60s 
 Minutes in a decimal hour
Since there are 60 minutes in an hour, a tenth part represents 60/10 = 6 minutes.
Conversion between decimal hours and minutes  

Decimal Hours  0.1  0.2  0.3  0.4  0.5  0.6  0.7  0.8  0.9  1.0  
Minutes  6m  12m  18m  24m  30m  36m  42m  48m  54m  60m 
 Hours in a decimal day
Since there are 24 hours in a day, a tenth part represents 24/10 = 2.4 hours (2 hours and 24 minutes).
Conversion between decimal day, and, Hours and minutes  

Decimal Days  0.1  0.2  0.3  0.4  0.5  0.6  0.7  0.8  0.9  1.0  
Hours:Minutes  2h 24m  4h 48m  7h 12m  9h 36m  12h  14h 24m  16h 48m  19h 12m  21h 36m  24h 
 Days and months in a decimal year
Since there are about 365 days in a year, there are about 365/10 = 36.5 days in a tenth of a year. Hence the year 2000.5 represents the day 2 July 2000.^{[14]} More exactly, a year is 365.25 days long, so a tenth of the year is 36.525 days (36 days, 12 hours, 36 minutes).
Conversion between decimal years, and, Date  

Decimal Years  0.1  0.2  0.3  0.4  0.5  0.6  0.7  0.8  0.9  1.0  
Days  36.525  73.050  109.575  146.100  182.625  219.150  255.675  292.200  328.725  365.250  
Date Time 
5 Feb 12:36 
14 Mar 1:15 
19 Apr 13:48 
26 May 2:24 
1 Jul 15:00 
7 Aug 3:45 
12 Sep 16:12 
19 Oct 4:48 
24 Nov 17:24 
1 year 
Aviation[edit]
For aviation purposes, where it is common to add times in an already complicated environment, time tracking is simplified by recording decimal fractions of hours, so, for instance, if you add 1:36, and 2:36 instead of getting 3:72 and converting it to 4:12 you add 1.6 and 2.6 and get 4.2 hours.^{[15]}
Other decimal times[edit]
Numerous individuals have proposed variations of decimal time, dividing the day into different numbers of units and subunits with different names. Most are based upon fractional days, so that one decimal time format may be easily converted into another, such that all the following are equivalent:
 0.500 fractional day
 5h 0m French decimal time
 @500.beats Swatch Internet Time (see below)
 50.0 kes or cés (centidays)
 500 millidays
 50.0% Percent Time
 12:00 Standard Time
Some decimal time proposals are based upon alternate units of metric time. The difference between metric time and decimal time is that metric time defines units for measuring time interval, as measured with a stopwatch, and decimal time defines the time of day, as measured by a clock. Just as standard time uses the metric time unit of the second as its basis, proposed decimal time scales may use alternative metric units.
Swatch Internet Time[edit]
On 23 October 1998, the Swiss watchmaking company Swatch introduced a decimal time called Swatch Internet Time, which divides the day into 1000 .beats (each 86.4 s) counted from 000–999, with @000 being midnight and @500 being noon CET (UTC +1), as opposed to UTC.^{[16]} The company sold watches which displayed Internet Time.
Internet Time has been criticized^{[by whom?]} for using an origin different from Universal Time, misrepresenting CET as "Biel Meridian Time", and for not providing for more precise units, although thirdparty applications have proposed "centibeats" (864 ms) and "millibeats" (86.4 ms).
Decimal times in fiction[edit]
This section does not cite any references or sources. (June 2007) 
Some science fiction authors use decimal time to reinforce the sense of "otherworldliness", notably in Infocom's Planetfall and Stationfall games, which use "1 chronon = 1/10000 day" such that 0000 = midnight and 5000 = noon.
Isaac Asimov also uses and describes the use of decimal time by the humans from the planet Solaria in his novel The Naked Sun, in which he describes the Solarian hour as being divided into ten decads, each of which is divided into a hundred centads.
Vernor Vinge's A Fire Upon the Deep and A Deepness in the Sky include human cultures that base time on seconds and multiples of seconds, with one "kilosecond" equal to 1,000 seconds (or approximately 15 minutes), one "megasecond" equal to 1,000,000 seconds (or approximately two weeks), and one "gigasecond" equal to 1,000,000,000 seconds (or approximately 30 years).
Joan D. Vinge's The Outcasts of Heaven Belt starts with a logarithmic chart comparing seconds with metric prefixes to standard names (1 s to 10^{10} s).
Greg Bear's Anvil of Stars tells the story of a starship crew that structure their calendar in "tendays" instead of weeks. Tendays are also mentioned in Diane Duane's The Wounded Sky.
Fritz Lang's science fiction film Metropolis depicts what is often misinterpreted as a decimal clock, as it has ten numerals, but it actually measures a workers' shift of ten conventional hours in one cycle, not decimal hours.^{[citation needed]} Since a normal day cannot be divided into a whole number of such shifts, a 24hour clock is displayed above the shift clock to give the actual time of day.
In the episode of The Simpsons titled "They Saved Lisa's Brain", the members of Springfield's Mensa make changes to their town, including the implementation of "metric time" to determine the time of day. Dr. Hibbert comments that the time is "eighty past ten". Using "metric time" to indicate decimal time, Principal Skinner comments, "The city's trains are not only running on time, but they are running on metric time!" while looking at an analog clock with numbers 1–10.^{[17]}
In the original Battlestar Galactica television series, both the Colonials and the Cylon Alliance employed a decimal time system. An are was an equivalent of an hour but was nearly twice as long. A centon was 1/100th of an are, in the same order of magnitude as a minute. A micron [sic] was 1/1000 of an are, on the same order of magnitude as a second. A centare was 100 are units and represented the same order of magnitude of time as a week. A yahren was 100 centare units and represented the same order of magnitude as a year. Usage of these terms was not always consistent. In the pilot, "Saga of a Star World", Lew Ayres as President Adar used the term "years". And occasionally, the terms above were used inconsistently, or other time terms were used in place of those listed above which seemed to be the same as one of those defined above (e.g. Secton).
The Warhammer 40,000 science fiction wargame universe uses a dating system that includes a year fraction, dividing the year into 1,000 equal parts (just over 8 hours each). Dates include an optional accuracy specifier, year fraction, year, and millennium so you see dates like 0123456.M41, which would be the decimal year 40456.123 with an accuracy of 0 (on earth).^{[18]}
The stardates used in Star Trek represented the time of day as a decimal fraction, so that they incremented by 0.1 every tenth of a day. In addition, in Star Trek: The Next Generation and its spinoffs, years were divided into 1000 stardates. The stardates in the 2009 film did not use decimal time, however.^{[19]}
The wall stopwatch with 100second dial was used in the sheep contest in part 6 (out of 10) of The 10th Kingdom miniseries.
See also[edit]
Wikimedia Commons has media related to Analogue decimal clocks. 
References[edit]
 ^ Nachum Dershowitz, Edward M. Reingold, Calendrical calculations, page 207
 ^ Joseph Needham, Ling Wang, and Derek John de Solla Price Heavenly clockwork: the great astronomical clocks of medieval China (Cambridge: Cambridge University Press, 1986) 199202, ISBN 0521322766.
 ^ JeanClaude Martzloff, "Chinese mathematical astronomy", in Helaine Selin, ed., Mathematics across cultures (Dordrecht: Kluwer, 2000) 373–407, p.393, ISBN 0792364813.
 ^ K. Yabuuti [Kiyoshi Yabuuchi], "Astronomical tables in China, from the Wutai to the Ch'ing dynasties", in Japanese Studies in the History of Science no. 2 (1963) 94–100.
 ^ Vera, Hector (2009). "Decimal Time: Misadventures of a Revolutionary Idea, 1793–2008". KronoScope (Brill) 9 (12): 31–32. doi:10.1163/156771509X12638154745382. ISSN 1567715X.
 ^ d'Alembert, Jean le Rond (1754). Encyclopédie.
 ^ Collignon, Claude Boniface (1788). Découverte d'étalons justes, naturels, invariables et universels. pp. 39–40.
 ^ ^{a} ^{b} Matthew Shaw (2011). Time and the French Revolution: The Republican Calendar, 1789year XIV. Boydell & Brewer Ltd. pp. 132–3. ISBN 9780861933112.
 ^ Carrigan, Richard A. (May–June 1978). "Decimal Time: Unlike the metric system of measurements, decimal time did not survive the French Revolution. But is dividing the day by tens a possibility for the future?". American Scientist 66 (3): 305–313. JSTOR 27848641. doi: 10.2307/27848641. Retrieved 20131220.
 ^ Ernest Leroux, editor (1900). Bulletin de géographie historique et descriptive, année 1899. Paris: Comité des travaux historiques et scientifiques. p. 142.
 ^ Bulletin of the International Railway Congress (English edition). 1899. p. 784.
 ^ Traité de Mécanique Céleste.
 ^ Outlines of Astronomy.
 ^ Wallace Hall Campbell, Introduction to geomagnetic fields, Edition 2, publisher: Cambridge University Press, 2003, ISBN 0521529530, ISBN 9780521529532 337 pages. (page 316)
 ^ http://www.casa.gov.au/scripts/nc.dll?WCMS:STANDARD::pc=PC_90100
 ^ Swatch Internet Time
 ^ "They Saved Lisa's Brain". The Simpsons. Season 10. Episode 22. 19990509. FOX.
 ^ Warhammer 40,000 3rd Edition Rulebook
 ^ Roddenberry, Gene (April 17, 1967). The Star Trek Guide (3rd revision ed.). p. 25.
 National Convention of the French Republic (1793) LE CALENDRIER RÉPUBLICAIN Textes officiels Décrets Relatifs à l'établissement de l'Ère Républicaine published by Philippe Chapelin 2002
 Sizes, Inc. (2000) decimal time units Last revised 27 February 2004
 Herschel, John (1849) Outlines of Astronomy published by Gallica 1995
External links[edit]
 Decimal Time Applet  with digital and analogue representations.
 What DIME is it? (Dime = Decimal Time) (Decimal time Java applet by Sergey Zaitsev.)
 Live Decimal Time in Javascript.


This page uses Creative Commons Licensed content from Wikipedia. A portion of the proceeds from advertising on Digplanet goes to supporting Wikipedia.