Dating material drawn from the archaeological record can be made by a direct study of an artifact, or may be deduced by association with materials found in the context the item is drawn from or inferred by its point of discovery in the sequence relative to datable contexts. Dating is carried out mainly post excavation, but to support good practice, some preliminary dating work called "spot dating" is usually run in tandem with excavation. Dating is very important in archaeology for constructing models of the past, as it relies on the integrity of dateble objects and samples. Many disciplines of archaeological science are concerned with dating evidence.
Absolute dating methods rely on using some physical property of an object or sample to calculate its age. Examples are:
- Radiocarbon dating - for dating organic materials
- Dendrochronology - for dating trees, and objects made from wood, but also very important for calibrating radiocarbon dates
- Thermoluminescence dating - for dating inorganic material including ceramics
- Optically stimulated luminescence or optical dating for archaeological applications
- Potassium–argon dating - for dating fossilized hominid remains
- Archaeomagnetic dating - Clay lined fire hearths take on a magnetic moment pointing to the North Pole each time they are fired and then cool. The position of the North Pole for the last time the fire hearth was used can be determined and compared to charts of known locations and dates
- Lead Corrosion Dating.
- Amino acid dating
- Obsidian hydration dating - a geochemical method of determining age in either absolute or relative terms of an artifact made of obsidian
- Rehydroxylation dating - for dating ceramic materials
Relative or indirect methods tend to use associations built from the archaeological body of knowledge. An example is seriation. Ultimately, relative dating relies on tying into absolute dating with reference to the present. One example of this is dendrochronology which uses a process of tying floating chronologies of tree rings together by cross referencing a body of work.
In practice several different dating techniques must be applied in some circumstances, thus dating evidence for much of an archaeological sequence recorded during excavation requires matching information from known absolute or some associated steps, with a careful study of stratigraphic relationships.
- Epigraphy - analysis of inscriptions, via identifying graphemes, clarifying their meanings, classifying their uses according to dates and cultural contexts, and drawing conclusions about the writing and the writers
- Palaeography - the study of ancient writing, including the practice of deciphering, reading, and dating historical manuscripts
- Numismatics - many coins have the date of their production written on them or their use is specified in the historical record
Age-equivalent stratigraphic markers
Tephrochronology: volcanic ash has its own signature for each eruption. In a sedimentary sequence the associated material within the ash layer can be dated, giving a date for the eruption. If this ash is found anywhere else in the world, a date will already be known (bearing in mind transportation time).
Oxygen isotope chronostratigraphy: this is based on the climatic stages displayed in SPECMAP relating to different cold and warm stages experienced in deep time; for example, point 5.5 in the SPECMAP chronology describes the peak of the last interglacial 125,000 years ago.
Archaeologists investigating a site may wish to date the activity rather than artifacts on site by dating the individual contexts which represents events. Some degree of dating objects by their position in the sequence can be made with known datable elements of the archaeological record or other assumed datable contexts deduced by a regressive form of relative dating which in turn can fix events represented by contexts to some range in time. For example the date of formation of a context which is totally sealed between two datable layers will fall between the dates of the two layers sealing it. However the date of contexts often fall in a range of possibilities so using them to date others is not a straightforward process.
- A horizontal layer
- Masonry wall remnant
- Backfill of the wall construction trench (sometimes called construction cut)
- A horizontal layer, probably the same as 1
- Construction cut for wall 2
- A clay floor abutting wall 2
- Fill of shallow cut 8
- Shallow pit cut
- A horizontal layer
- A horizontal layer, probably the same as 9
- Natural sterile ground formed before human occupation of the site
- Trample in the base of cut 5 formed by workmen's boots constructing the structure wall 2 and floor 6 is associated with.
If we know the date of context 1 and context 9 we can deduce that context 7, the backfilling of pit 8, occurred sometime after the date for 9 but before the date for 1, and if we recover an assemblage of artifacts from context 7 that occur nowhere else in the sequence, we have isolated them with a reasonable degree of certainty to a discrete range of time. In this instance we can now use the date we have for finds in context 7 to date other sites and sequences. In practice a huge amount of cross referencing with other recorded sequences is required to produce dating series from stratigraphic relationships such as the work in seriation.
Residual and intrusive Finds
One issue in using stratigraphic relationships is that the date of artifacts in a context does not represent the date of the context, but just the earliest date the context could be. If we look at the sequence in fig A, we may find that the cut for the construction of wall 2, context 5, has cut through layers 9 and 10, and in doing so has introduced the possibility that artifacts from layers 9 and 10 may be redeposited higher up the sequence in the context representing the backfill of the construction cut, context 3. These artifacts are referred to as "residual" or "residual finds". It is crucial that dating a context is based on the latest dating evidence drawn from the context. We can also see that if the fill of cut 5 — the wall 2, backfill 3 and trample 12 — are not removed entirely during excavation because of "undercutting", non-residual artifacts from these later "higher" contexts 2, 3 and 12 could contaminate the excavation of earlier contexts such as 9 and 10 and give false dating information. These artifacts may be termed intrusive finds.
|Wikimedia Commons has media related to Archaeology.|
- Fluorine absorption dating
- Harris matrix
- Obsidian hydration dating
- Oxidizable Carbon Ratio dating
- Vole Clock
- Eighmy, Jeffery, Sternberg, Robert (editors) (1990). "“Archaeomagnetic Dating.”". Tucson: The University of Arizona Press.
- Chemistry Professor Shimon Reich, a specialist in superconductivity, has demonstrated a method for dating artifacts based on the magnetic properties of lead, a material widely used in Israel and elsewhere in antiquity. Reich and coworkers found that at cryogenic temperatures, lead becomes a superconductor, but the corrosion products formed from centuries of exposure to air and water (lead oxide and lead carbonate) do not superconduct. On the basis of magnetic measurements and comparison with artifacts that were known (using other techniques) to be up to 2500 years old, the group showed that the mass of lead corrosion products is directly proportional to an object's age (New Journal of Physics, 2003, 5, 99)
- Kinetics of amino acid racemization (epimerization) in the dentine of fossil and modern bear teeth Laureano Canoira, Maria-Jess Garca-Martnez, Juan F. Llamas, Jos E. Ortz, Trinidad De Torres International Journal of Chemical Kinetics 35(11):576-591 (2003)
- ARCHAEOLOGICAL APPLICATIONS OF AMINO ACID RACEMIZATION
- 2008  quote: The results provide a compelling case for applicability of amino acid racemization methods as a tool for evaluating changes in depositional dynamics, sedimentation rates, time-averaging, temporal resolution of the fossil record, and taphonomic overprints across sequence stratigraphic cycles.
- "Fire And Water Reveal New Archaeological Dating Method". Science Daily. May 25, 2009. Retrieved 2009-05-26. "A team from the University of Manchester and the University of Edinburgh has discovered a new technique which they call 'rehydroxylation dating' that can be used on fired clay ceramics like bricks, tile and pottery."
- M. Jacoby, Chemistry in the Holy Land, Chemical & Engineering News, 5 March 2007, page 20, published by American Chemical Society
This page uses Creative Commons Licensed content from Wikipedia. A portion of the proceeds from advertising on Digplanet goes to supporting Wikipedia.