digplanet beta 1: Athena
Share digplanet:

Agriculture

Applied sciences

Arts

Belief

Business

Chronology

Culture

Education

Environment

Geography

Health

History

Humanities

Language

Law

Life

Mathematics

Nature

People

Politics

Science

Society

Technology

Construct validity is “the degree to which a test measures what it claims, or purports, to be measuring.”[1][2][3] In the classical model of validity, construct validity is one of three main types of validity evidence, alongside content validity and criterion validity.[4][5] Modern validity theory defines construct validity as the overarching concern of validity research, subsuming all other types of validity evidence.[6][7]

Construct validity is the appropriateness of inferences made on the basis of observations or measurements (often test scores), specifically whether a test measures the intended construct. Constructs are abstractions that are deliberately created by researchers in order to conceptualize the latent variable, which is the cause of scores on a given measure (although it is not directly observable). Construct validity examines the question: Does the measure behave like the theory says a measure of that construct should behave?

Construct validity is essential to the perceived overall validity of the test. Construct validity is particularly important in the social sciences, psychology, psychometrics and language studies.

Psychologists such as Samuel Messick (1989) have pushed for a unified view of construct validity “…as an integrated evaluative judgment of the degree to which empirical evidence and theoretical rationales support the adequacy and appropriateness of inferences and actions based on test scores…”[8] Key to construct validity are the theoretical ideas behind the trait under consideration, i.e. the concepts that organize how aspects of personality, intelligence, etc. are viewed.[9] Paul Meehl states that "The best construct is the one around which we can build the greatest number of inferences, in the most direct fashion." [2]

History[edit]

Throughout the 1940s scientists had been trying to come up with ways to validate experiments prior to publishing them. The result of this was a myriad of different validities (intrinsic validity, face validity, logical validity, empirical validity, etc.). This made it difficult to tell which ones were actually the same and which ones were not useful at all. Until the middle of the 1950s there were very few universally accepted methods to validate psychological experiments. The main reason for this was because no one had figured out exactly which qualities of the experiments should be looked at before publishing. Between 1950 and 1954 the APA Committee on Psychological Tests met and discussed the issues surrounding the validation of psychological experiments.[2]

Around this time the term construct validity was first coined by Paul Meehl and Lee Cronbach in their seminal article Construct Validity In Psychological Tests. They noted the idea of construct validly was not new at that point. Rather, it was a combinations of many different types of validity dealing with theoretical concepts. They proposed the following three steps to evaluate construct validity:

  1. articulating a set of theoretical concepts and their interrelations
  2. developing ways to measure the hypothetical constructs proposed by the theory
  3. empirically testing the hypothesized relations[2]

Many psychologists note that an important role of construct validation in psychometrics was that it place more emphasis on theory as opposed to validation. The core issue with validation was that a test could be validated, but that did not necessarily show that it measured the theoretical construct it purported to measure. Construct validity has three aspects or components: the substantive component, structural component, and external component.[10] They are related close to three stages in the test construction process: constitution of the pool of items, analysis and selection of the internal structure of the pool of items, and correlation of test scores with criteria and other variables.

In the 1970s there was growing debate between theorist who began to see construct validity as the dominant model pushing towards a more unified theory of validity and those who continued to work from multiple validity frameworks.[11] Many psychologists and education researchers saw “predictive, concurrent, and content validities as essentially ad hoc, construct validity was the whole of validity from a scientific point of view”[10] In the 1974 version of The Standards for Educational and Psychological Testing the inter-relatedness of the three different aspects of validity was recognized: "These aspects of validity can be discussed independently, but only for convenience. They are interrelated operationally and logically; only rarely is one of them alone important in a particular situation". In 1989 Messick presented a new conceptualization of construct validity as a unified and multi-faceted concept.[12] Under this framework, all forms of validity are connected to and are dependent on the quality of the construct. He noted that a unified theory was not his own idea, but rather the culmination of debate and discussion within the scientific community over the preceding decades. There are six aspects of construct validity in Messick’s Unified Theory of Construct Validity.[13] They examine six items that measure the quality of a test’s construct validity:

  1. Consequential- What are the potential risks if the scores are, in actuality, invalid or inappropriately interpreted? Is the test still worthwhile given the risks?
  2. Content- Do test items appear to be measuring the construct of interest?
  3. Substantive- Is the theoretical foundation underlying the construct of interest sound?
  4. Structural- Do the interrelationships of dimensions measured by the test correlate with the construct of interest and test scores?
  5. External- Does the test have convergent, discriminant, and predictive qualities?
  6. Generalizability- Does the test generalize across different groups, settings and tasks?

How construct validity should be properly viewed is still a subject of debate for validity theorists. The core of the difference lies in an epistemological difference between Positivist and Postpositivist theorists.

Evaluation[edit]

Evaluation of construct validity requires that the correlations of the measure be examined in regard to variables that are known to be related to the construct (purportedly measured by the instrument being evaluated or for which there are theoretical grounds for expecting it to be related). This is consistent with the multitrait-multimethod matrix (MTMM) of examining construct validity described in Campbell and Fiske's landmark paper (1959).[14] There are other method to evaluate construct validity besides MTMM. It can be evaluated through different forms of factor analysis, structural equation modeling (SEM), and other statistical evaluations.[15][16] It is important to note that a single study does not prove construct validity. Rather it is a continuous process of evaluation, reevaluation, refinement, and development. Correlations that fit the expected pattern contribute evidence of construct validity. Construct validity is a judgment based on the accumulation of correlations from numerous studies using the instrument being evaluated.[17]

Most researchers attempt to test the construct validity before the main research. To do this pilot studies may be utilized. Pilot studies are small scale preliminary studies aimed at testing the feasibility of a full-scale test. These pilot studies establish the strength of their research and allow them to make any necessary adjustments. Another method is the known-groups technique, which involves administering the measurement instrument to groups expected to differ due to known characteristics. Hypothesized relationship testing involves logical analysis based on theory or prior research.[3]Intervention studies are yet another method of evaluating construct validity. Intervention studies where a group with low scores in the construct is tested, taught the construct, and then re-measured can demonstrate a tests construct validity. If there is a significant difference pre-test and post-test, which are analyzed by statistical tests, then this may demonstrate good construct validity.[18]

Convergent and discriminant validity[edit]

Convergent and discriminant validity are the two subtypes of validity that make up construct validity. Convergent validity refers to the degree to which two measures of constructs that theoretically should be related, are in fact related. In contrast discriminant validity tests whether concepts or measurements that are supposed to be unrelated are, in fact, unrelated.[14] Take, for example, a construct of general happiness. If a measure of general happiness had convergent validity, then constructs similar to happiness (satisfaction, contentment, cheerfulness, etc.) should relate closely to the measure of general happiness. If this measure has discriminate validity, then constructs that are not supposed to be related to general happiness (sadness, depression, despair, etc.) should not relate to the measure of general happiness. Measures can have one of the subtypes of construct validity and not the other. Using the example of general happiness, a researcher could create an inventory where there is a very high correlation between general happiness and contentment, but if there is also a significant correlation between happiness and depression, then the measure's construct validity is called into question. The test has convergent validity but not discriminate validity.

Nomological network[edit]

Main article: nomological network

Paul Meehl and Lee Cronbach (1957) proposed that the development of a nomological net was essential to measurement of a tests construct validity. A nomological network defines a construct by illustrating its relation to other constructs and behaviors.[2] It is a representation of the concepts (constructs) of interest in a study, their observable manifestations and the interrelationship among them. It examines whether the relationships between similar construct are considered with relationships between the observed measures of the constructs. Thorough observation of constructs relationships to each other it can generate new constructs. For example, intelligence and working memory are considered highly related constructs. Through the observation of their underlying components psychologists developed new theoretical constructs such as: controlled attention[19] and short term loading.[20] Creating a nomological net can also make the observation and measurement of existing constructs more efficient by pinpointing errors.[2] Researchers have found that studying the dimensions of the human skull (Phrenology) are not indicators of intelligence. By removing the theory of Phernology from the nomological net of intelligence, testing constructs of intelligence is made more efficient. The weaving of all of these interrelated concepts and their observable traits creates a “net” that supports their theoretical concept. For example, in the nomological network for academic achievement, we would expect observable traits of academic achievement (i.e. GPA, SAT, and ACT scores) to relate to the observable traits for studiousness (hours spent studying, attentiveness in class, detail of notes). If they do not then there is a problem with the measurement of academic achievement or studiousness. If they are indicators of one another then the nomological network, and therefore the constructed theory, of academic achievement is strengthened. Although the nomological network proposed a theory of how to strengthen constructs, it doesn't tell us how we can assess the construct validity in a study.

Multitrait-multimethod matrix[edit]

The multitrait-multimethod matrix (MTMM) is an approach to examining Construct Validity developed by Campbell and Fiske (1959).[14] This model examines convergence (evidence that different measurement methods of a construct give similar results) and discriminability (ability to differentiate the construct from other related constructs). It measures six traits: the evaluation of convergent validity, the evaluation of discriminant (divergent) validity, trait-method units, multitrait-multimethods, truly different methodologies, and trait characteristics. This design allows investigators to test for: “convergence across different measures…of the same ‘thing’…and for divergence between measures…of related but conceptually distinct ‘things'.[21]

Construct validity in experiments[edit]

In order to show an example of construct validity, it would be best to do so with a landmark experiment. One of which is the Milgram’s study of obedience. The purpose of this study was to look at whether or not a person would continue to do something they were uncomfortable with just because someone of authority was telling them to do so. Essentially it was intended to test whether people are obedient or not.

This was done by getting participants through voluntary participation in the form of a newspaper advertisement.[22] They were all men of various ages, level of education, and occupation. There was also an “experimenter” running the experiment and “learner” that acted in the study.[22] The participants were essentially to listen to the “experimenter” and shock the “learner” every time they responded incorrectly to studied information. There were 30 different levels of shock to be administered.[22] The participants were allowed to hear the “learner’s” reaction to the shock. If the participant did not want to continue with the shocks they were heavily encouraged to continue. If they refused they were considered defiant before the 13th step and if they continued passed the 13th step they were considered obedient.[22]

Now look at this in regard to construct validity. Does the level at which the person decides not to continue with the shock really accurately measure a person’s level of obedience? There are two ways looking at this idea. There is the definitionalist’s view of construct validity. This view states it is essential to define exactly what we want to be looking for when we are testing something[23] So in this case, is the level of shock testing for level of obedience and level of obedience only? The other view is called the relationist’s view. This view states that, in this case, it would be important to make sure to test for obedience since that is the intention of the study, but if other factors come into play as long as it can relate to obedience it is fine that it may be included in the testing.[23]

It would be said that the Milgram’s study does measure obedience very effectively, but it can be seen where other factors may come into play. So this study does seem to have construct validity. However it is important to note that this most likely aligns the relationist’s view. This is because this experiment can also just be showing that some people are just oblivious to things going on around them. They could also feel a sense of responsibility to finish as they were monetarily compensated for their time. They were guaranteed the money no matter what but some people may have really taken that to heart.[22]

The level does measure level of obedience within the relationist’s view. Construct validity is present in the Milgram’s study making it a good valid study for its testing purposes at the time it was administered. In this day and age though, it would not be approved by an internal review board due to the possible psychological harm done to the participant. Even still, this is a landmark study and one that contains a good example to proper construct validity.

Threats to construct validity[edit]

Since construct validity attempts to create a universal cohesion, there are many possible threats to it. Construct validity is threatened by participant re-activity to the study situation (e.g. the Hawthorne effect), altered behavior due to the novelty of a new treatment, researcher expectations, and diffusion or contamination of the treatment conditions. Developing a poor construct can be an issue. If a construct is too broad or too narrow it can invalidate an entire experiment.[24] For example, a researcher might try to use job satisfaction to define overall happiness. This is too narrow, as somebody may love their job but have an unhappy life outside the workplace. Likewise, using general happiness to measure happiness at work is too broad. Construct confounding is another threat. Construct confounding occurs when other constructs affect the measured construct.[25] For example, self-worth is confounded by self-esteem and self-confidence. One’s perception of self-worth is effected by their state of self-esteem or self-confidence. Another threat is hypothesis guessing. If a subject makes assumption of the aims of the research their behavior changes and it affects construct validity. Similar, if an individual becomes apprehensive during an experiment, it could affect his or her performance.[26] Researches themselves, can be threats to construct validity. Researcher’s expediencies and biases, whether overt or unintentional, can lower construct validity by clouding the effect of the research variable. To avoid these effects interaction should be minimized and double-blind experiments should be used. Variance in scores can show weak construct validity. For example if native English speakers score higher than individuals who speak English a second language on a test written in English trying to measure intelligence, than the test has poor construct validity. It measures language ability rather than intelligence.

Another take on construct validity is described by William M. Trochim.[27] He includes “Inadequate Preoperational Explication of Constructs, Mono-Operation Bias, Mono-Method Bias, Interaction of Different Treatments, Interaction of Testing and Treatment, Restricted Generalizability Across Constructs, Confounding Constructs and Levels of Constructs, Hypothesis Guessing, Evaluation Apprehension, and Experimenter Expectancies", in his definitions of threats to construct validity.[27]

Inadequate preoperational explications of constructs[edit]

"Inadequate preoperational explications of constructs" is not defining the construct of the experiment well enough.[27]

Mono-operation bias[edit]

"Mono-operation bias" pertains to only using one variable or only suggesting one way of dealing with a problem.[27] The problem with this is, it does not look at different aspects of the experiment and the true reasons for the experiment.[27]

Mono-method bias[edit]

"Mono-method bias" is how an experimenter measured or observed their experiment may correlate to things they did not expect.[27]

Interaction of different treatments[edit]

"Interaction of different treatments" deals with an experiment where an experimenter may implement a plan to help a certain population, and they assume that their plan caused an effect that could not be achieved for other reasons that might also be incorporated with that population.[27]

Interaction of testing and treatment[edit]

"Interaction of testing and treatment" involves labeling a program without addressing the issue of the treatment being a possible part of the program.[27]

Restricted generalizability across constructs[edit]

"Restricted generalizability across constructs" means an experiment worked in one particular situation, but it might not work in any other situation than that one.[27]

Hypothesis guessing[edit]

In "hypothesis guessing" the participants in an experiment may try to figure out what the goal of an experiment is, and their thoughts about what they think is being studied may affect how they respond in the experiment and alter the results.[27]

Evaluation apprehension[edit]

"Evaluation apprehension" explains how a participant’s mind and body’s react to knowing that they are being experimented on . This could alter your results of an experiment.[27]

Experimenter expectancies[edit]

"Experimenter expectancies" explain that the way a researcher may want or may expect an experiment to go, may be a potential effect of why that experiment went a certain way.[27]

See also[edit]

References[edit]

  1. ^ Brown, J. D. (1996). Testing in language programs. Upper Saddle River, NJ: Prentice Hall Regents. 
  2. ^ a b c d e f Cronbach, L. J.; Meehl, P.E. (1955). "Construct Validity in Psychological Tests". Psychological Bulletin 52: 281–302. doi:10.1037/h0040957. 
  3. ^ a b Polit DF Beck CT (2012). Nursing Research: Generating and Assessing Evidence for Nursing Practice, 9th ed. Philadelphia, USA: Wolters Klower Health, Lippincott Williams & Wilkins
  4. ^ Guion, R. M. (1980). "On trinitarian doctrines of validity". Professional Psychology 11: 385–398. doi:10.1037/0735-7028.11.3.385. 
  5. ^ Brown, J. D. (1996). Testing in language programs. Upper Saddle River, NJ: Prentice Hall Regents. 
  6. ^ Messick, S. (1995). "Validity of psychological assessment: Validation of inferences from persons’ responses and performances as scientific inquiry into score meaning". American Psychologist 50: 741–749. doi:10.1037/0003-066x.50.9.741. 
  7. ^ Schotte, C. K. W.; Maes, M.; Cluydts, R.; De Doncker, D.; Cosyns, P. (1997). "Construct validity of the Beck Depression Inventory in a depressive population". Journal of Affective Disorders 46 (2): 115–125. doi:10.1016/s0165-0327(97)00094-3. 
  8. ^ Messick, Samuel (1998). "Test validity: A matter of consequence". Social Indicators Research 45 (1-3): 35–44. 
  9. ^ Pennington, Donald (2003). Essential Personality. Arnold. ISBN 0-340-76118-0. 
  10. ^ a b Loevinger, J. (1957). Objective Tests As Instruments Of Psychological Theory: Monograph Supplement 9. Psychological reports, 3(3), 635-694
  11. ^ Kane, M. T. (2006). "Validation.". Educational measurement, 4,: 17–64. 
  12. ^ Messick,, S. (1989). "Validity.". In R. L. Linn (Ed.),. Educational Measurement (3rd ed., pp. 13-103). New York: American Council on Education/Macmillan. 
  13. ^ Messick,, S. (1995). "Standards of validity and the validity of standards in performance assessment.". Educational Measurement: Issues and Practice, 14 (4,): 5–8. 
  14. ^ a b c Campbell, D. T. (1959). Convergent and discriminant validation by the multitrait-multimethod matrix. (56). Psychological Bulletin. pp. 81–105
  15. ^ Hammond, K. R., Hamm, R. M., & Grassia, J. (1986). Generalizing over conditions by combining the multitrait multimethod matrix and the representative design of experiments (No. CRJP-255A). Colorado University At Boulder Center For Research On Judgment And Policy.
  16. ^ Westen, Drew, and Robert Rosenthal. 2003. Quantifying construct validity: Two simple measures. Journal of Personality and Social Psychology 84, no. 3: 608-618.
  17. ^ Peter, J. P. (1981). Construct validity: a review of basic issues and marketing practices. Journal of Marketing Research, 133-145.
  18. ^ Dimitrov, D. M., & Rumrill, Jr, P. D. (2003). Pretest-posttest designs and measurement of change. Work: A Journal of Prevention, Assessment and Rehabilitation, 20(2), 159-165.
  19. ^ Engle, R. W., Kane, M. J., & Tuholski, S. W. (1999). Individual differences in working memory capacity and what they tell us about controlled attention, general fluid intelligence, and functions of the prefrontal cortex. In A. Miyake, & P. Shah (Eds.),Models of working memory (pp. 102−134). Cambridge: Cambridge University Press.
  20. ^ Ackerman, P. L., Beier, M. E., & Boyle, M. O. (2002). Individual differences in working memory within a nomological network of cognitive and perceptual speed abilities. Journal of Experimental Psychology-General, 131, 567−589.
  21. ^ Cook, T. D., & Campbell, D. T. (1979). Quasi-experimentation. Boston: Houghton Mifflin. Edgington, E. S. (1974). A new tabulation of statistical procedures used in APA journals. American Psychologist, 29, 61
  22. ^ a b c d e Ksenyeh, Ed & Liu, David. (2001). Conflict, Order and Action : Readings in Sociology. p. 134 - 149. ISBN 155130192X, 9781551301921.
  23. ^ a b Trochim, William. The Research Methods Knowledge Base, 2nd Edition. Internet WWW page, at URL: [1].
  24. ^ MacKenzie, S. B. (2003). The dangers of poor construct conceptualization. Journal of the Academy of Marketing Science, 31(3), 323-326.
  25. ^ White, D., & Hultquist, R. A. (1965). Construction of confounding plans for mixed factorial designs. The Annals of Mathematical Statistics, 1256-1271.
  26. ^ McCroskey, J. C., Richmond, V. P., & McCroskey, L. L. (2006). An introduction to communication in the classroom: The role of communication in teaching and training. Boston: Allyn & Bacon
  27. ^ a b c d e f g h i j k l [2], Trochim, William M. The Research Methods Knowledge Base, 2nd Edition.

External links[edit]


Original courtesy of Wikipedia: http://en.wikipedia.org/wiki/Construct_validity — Please support Wikipedia.
This page uses Creative Commons Licensed content from Wikipedia. A portion of the proceeds from advertising on Digplanet goes to supporting Wikipedia.
5834 videos foundNext > 

BTEC Research Methods: Week 4: Construct Validity

A video discussing construct validity in research.

03: Reliability and validity (1/3)

First part (out of three) introducing concepts of reliability and validity in our measurement of psychological constructs.

Validity

This video describes the concept of measurement validity in social research.

Threats to Construct Validity

Construct Validity - Psych Yogi's 30 Second Psychology

http://psychyogi.org.

Types of Validity (PSYC 321)

This is a lecture about types of validity posted for my PSYC 321 Research Methods students at Boise State University.

Validity - Does your measuring instrument measure, what it is supposed to measure? (Psychology)

Using bad measuring instruments can have disastrous consequences. Therefore newly developed tests, questionaires, etc. have to meet the highest standards. Al...

CVA Construct Validity - Nicole Kersting

Validity -- How Can You Tell a Good Test from a Bad One?

http://www.psyctesthero.com: From The Psych Files podcast. The real test of a test's "mettle" -- or how confident you can be in the results -- comes when you...

DSP Video 5 Validity and Reliability.mp4

Table of Contents: 00:03 - LAW & ORDERStatistical Victims Unit 00:10 - 00:18 - Reliability and Validity 00:27 - Reliability and Validity 00:52 - Reliability ...

5834 videos foundNext > 

4 news items

 
7thSpace Interactive (press release)
Tue, 12 Aug 2014 21:52:30 -0700

Construct validity was assessed by testing whether patients reporting an ADE had a lower general quality of life and physical health than those not reporting an ADE, using Mann?Whitney U-tests and t-tests (significance level <0.05). For concurrent ...
 
Insurance News Net
Wed, 30 Jul 2014 12:07:30 -0700

The pilot design will support the standard suite of psychometric analyses conducted to identify and develop composite scoring algorithms as well as to provide evidence of the reliability and construct validity of the composite scores and any scores ...
 
7thSpace Interactive (press release)
Tue, 19 Aug 2014 20:33:45 -0700

Assessment of health-related quality of life (HRQL) is particularly important in patients with progressive and incurable diseases such as idiopathic pulmonary fibrosis (IPF). The St George?s Respiratory Questionnaire (SGRQ) has frequently been used to ...
 
7thSpace Interactive (press release)
Tue, 12 Aug 2014 04:48:45 -0700

The construct validity of the function and pain scale was confirmed and only the pain scale contains one item with differential item functioning (DIF). The responsiveness of the function and pain scale is moderate when compared to anchor questions.
Loading

Oops, we seem to be having trouble contacting Twitter

Talk About Construct validity

You can talk about Construct validity with people all over the world in our discussions.

Support Wikipedia

A portion of the proceeds from advertising on Digplanet goes to supporting Wikipedia. Please add your support for Wikipedia!