digplanet beta 1: Athena
Share digplanet:

Agriculture

Applied sciences

Arts

Belief

Chronology

Culture

Education

Environment

Geography

Health

History

Humanities

Language

Law

Life

Mathematics

Nature

People

Politics

Science

Society

Technology

Alternating Current (green curve). The horizontal axis measures time; the vertical, current or voltage.

In alternating current (AC, also ac), the flow of electric charge periodically reverses direction. In direct current (DC, also dc), the flow of electric charge is only in one direction.

The abbreviations AC and DC are often used to mean simply alternating and direct, as when they modify current or voltage.[1] [2]

AC is the form in which electric power is delivered to businesses and residences. The usual waveform of an AC power circuit is a sine wave. In certain applications, different waveforms are used, such as triangular or square waves. Audio and radio signals carried on electrical wires are also examples of alternating current. In these applications, an important goal is often the recovery of information encoded (or modulated) onto the AC signal.

History

The city lights of Prince George, British Columbia viewed in a motion blurred exposure. The AC blinking causes the lines to be dotted rather than continuous.
Westinghouse Early AC System 1887
(US patent 373035)

The first alternator to produce alternating current was a dynamo electric generator based on Michael Faraday's principles constructed by the French instrument maker Hippolyte Pixii in 1832.[3] Pixii later added a commutator to his device to produce the (then) more commonly used direct current. The earliest recorded practical application of alternating current is by Guillaume Duchenne, inventor and developer of electrotherapy. In 1855, he announced that AC was superior to direct current for electrotherapeutic triggering of muscle contractions.[4]

In 1876, Russian engineer Pavel Yablochkov invented a lighting system based on a set of induction coils where the primary windings were connected to a source of AC. The secondary windings could be connected to several 'electric candles' (arc lamps) of his own design.[5][6] The coils Yablochkov employed functioned essentially as transformers.[5]

A power transformer developed by Lucien Gaulard and John Dixon Gibbs was demonstrated in London in 1881, and attracted the interest of Westinghouse. They also exhibited the invention in Turin in 1884, where it was adopted for an electric lighting system. Many of their designs were adapted to the particular laws governing electrical distribution in the UK.[citation needed]

Sebastian Ziani de Ferranti went into this business in 1882 when he set up a shop in London designing various electrical devices. Ferranti believed in the success of alternating current power distribution early on, and was one of the few experts in this system in the UK. In 1887 the London Electric Supply Corporation (LESCo) hired Ferranti for the design of their power station at Deptford. He designed the building, the generating plant and the distribution system. On its completion in 1891 it was the first truly modern power station, supplying high-voltage AC power that was then "stepped down" for consumer use on each street. This basic system remains in use today around the world. Many homes all over the world still have electric meters with the Ferranti AC patent stamped on them.

William Stanley, Jr. designed one of the first practical devices to transfer AC power efficiently between isolated circuits. Using pairs of coils wound on a common iron core, his design, called an induction coil, was an early transformer. The AC power system used today developed rapidly after 1886, and included contributions by Nikola Tesla (licensed to George Westinghouse) and Carl Wilhelm Siemens. AC systems overcame the limitations of the direct current system used by Thomas Edison to distribute electricity efficiently over long distances even though Edison attempted to discredit alternating current as too dangerous during the War of Currents.

The first commercial power plant in the United States using three-phase alternating current was at the Mill Creek No. 1 Hydroelectric Plant near Redlands, California, in 1893 designed by Almirian Decker. Decker's design incorporated 10,000-volt three-phase transmission and established the standards for the complete system of generation, transmission and motors used today.

The Ames Hydroelectric Generating Plant (spring of 1891) and the original Niagara Falls Adams Power Plant (August 25, 1895) were among the first AC-powered hydroelectric plants.

The Jaruga Hydroelectric Power Plant in Croatia was set in operation on 28 August 1895. The two generators (42 Hz, 550 kW each) and the transformers were produced and installed by the Hungarian company Ganz. The transmission line from the power plant to the City of Šibenik was 11.5 kilometers (7.1 mi) long on wooden towers, and the municipal distribution grid 3000 V/110 V included six transforming stations.

Alternating current circuit theory developed rapidly in the latter part of the 19th and early 20th century. Notable contributors to the theoretical basis of alternating current calculations include Charles Steinmetz, Oliver Heaviside, and many others.[7][8] Calculations in unbalanced three-phase systems were simplified by the symmetrical components methods discussed by Charles Legeyt Fortescue in 1918.

Transmission, distribution, and domestic power supply

AC voltage may be increased or decreased with a transformer. Use of a higher voltage leads to significantly more efficient transmission of power. The power losses in a conductor are a product of the square of the current and the resistance of the conductor, described by the formula

$P_{\rm L} = I^2 R \, .$

This means that when transmitting a fixed power on a given wire, if the current is doubled, the power loss will be four times greater.

The power transmitted is equal to the product of the current and the voltage (assuming no phase difference); that is,

$P_{\rm T} = IV \, .$

Thus, the same amount of power can be transmitted with a lower current by increasing the voltage. It is therefore advantageous when transmitting large amounts of power to distribute the power with high voltages (often hundreds of kilovolts).

High voltage transmission lines deliver power from electric generation plants over long distances using alternating current. These lines are located in eastern Utah.

However, high voltages also have disadvantages, the main one being the increased insulation required, and generally increased difficulty in their safe handling. In a power plant, power is generated at a convenient voltage for the design of a generator, and then stepped up to a high voltage for transmission. Near the loads, the transmission voltage is stepped down to the voltages used by equipment. Consumer voltages vary depending on the country and size of load, but generally motors and lighting are built to use up to a few hundred volts between phases.

The utilization voltage delivered to equipment such as lighting and motor loads is standardized, with an allowable range of voltage over which equipment is expected to operate. Standard power utilization voltages and percentage tolerance vary in the different mains power systems found in the world.

Modern high-voltage direct-current (HVDC) electric power transmission systems contrast with the more common alternating-current systems as a means for the efficient bulk transmission of electrical power over long distances. HVDC systems, however, tend to be more expensive and less efficient over shorter distances than transformers.[citation needed] Transmission with high voltage direct current was not feasible when Edison, Westinghouse and Tesla were designing their power systems, since there was then no way to economically convert AC power to DC and back again at the necessary voltages.

Three-phase electrical generation is very common. The simplest case is three separate coils in the generator stator that are physically offset by an angle of 120° to each other. Three current waveforms are produced that are equal in magnitude and 120° out of phase to each other. If coils are added opposite to these (60° spacing), they generate the same phases with reverse polarity and so can be simply wired together.

In practice, higher "pole orders" are commonly used. For example, a 12-pole machine would have 36 coils (10° spacing). The advantage is that lower speeds can be used. For example, a 2-pole machine running at 3600 rpm and a 12-pole machine running at 600 rpm produce the same frequency. This is much more practical for larger machines.

If the load on a three-phase system is balanced equally among the phases, no current flows through the neutral point. Even in the worst-case unbalanced (linear) load, the neutral current will not exceed the highest of the phase currents. Non-linear loads (e.g., computers) may require an oversized neutral bus and neutral conductor in the upstream distribution panel to handle harmonics. Harmonics can cause neutral conductor current levels to exceed that of one or all phase conductors.

For three-phase at utilization voltages a four-wire system is often used. When stepping down three-phase, a transformer with a Delta (3-wire) primary and a Star (4-wire, center-earthed) secondary is often used so there is no need for a neutral on the supply side.

For smaller customers (just how small varies by country and age of the installation) only a single phase and the neutral or two phases and the neutral are taken to the property. For larger installations all three phases and the neutral are taken to the main distribution panel. From the three-phase main panel, both single and three-phase circuits may lead off.

Three-wire single-phase systems, with a single center-tapped transformer giving two live conductors, is a common distribution scheme for residential and small commercial buildings in North America. This arrangement is sometimes incorrectly referred to as "two phase". A similar method is used for a different reason on construction sites in the UK. Small power tools and lighting are supposed to be supplied by a local center-tapped transformer with a voltage of 55 V between each power conductor and earth. This significantly reduces the risk of electric shock in the event that one of the live conductors becomes exposed through an equipment fault whilst still allowing a reasonable voltage of 110 V between the two conductors for running the tools.

A third wire, called the bond (or earth) wire, is often connected between non-current-carrying metal enclosures and earth ground. This conductor provides protection from electric shock due to accidental contact of circuit conductors with the metal chassis of portable appliances and tools. Bonding all non-current-carrying metal parts into one complete system ensures there is always a low electrical impedance path to ground sufficient to carry any fault current for as long as it takes for the system to clear the fault. This low impedance path allows the maximum amount of fault current, causing the overcurrent protection device (breakers, fuses) to trip or burn out as quickly as possible, bringing the electrical system to a safe state. All bond wires are bonded to ground at the main service panel, as is the Neutral/Identified conductor if present.

AC power supply frequencies

The frequency of the electrical system varies by country; most electric power is generated at either 50 or 60 hertz. Some countries have a mixture of 50 Hz and 60 Hz supplies, notably Japan.

A low frequency eases the design of electric motors, particularly for hoisting, crushing and rolling applications, and commutator-type traction motors for applications such as railways. However, low frequency also causes noticeable flicker in arc lamps and incandescent light bulbs. The use of lower frequencies also provided the advantage of lower impedance losses, which are proportional to frequency. The original Niagara Falls generators were built to produce 25 Hz power, as a compromise between low frequency for traction and heavy induction motors, while still allowing incandescent lighting to operate (although with noticeable flicker). Most of the 25 Hz residential and commercial customers for Niagara Falls power were converted to 60 Hz by the late 1950s, although some[which?] 25 Hz industrial customers still existed as of the start of the 21st century. 16.7 Hz power (formerly 16 2/3 Hz) is still used in some European rail systems, such as in Austria, Germany, Norway, Sweden and Switzerland.

Off-shore, military, textile industry, marine, computer mainframe, aircraft, and spacecraft applications sometimes use 400 Hz, for benefits of reduced weight of apparatus or higher motor speeds.

Effects at high frequencies

A direct current flows uniformly throughout the cross-section of a uniform wire. An alternating current of any frequency is forced away from the wire's center, toward its outer surface. This is because the acceleration of an electric charge in an alternating current produces waves of electromagnetic radiation that cancel the propagation of electricity toward the center of materials with high conductivity. This phenomenon is called skin effect.

At very high frequencies the current no longer flows in the wire, but effectively flows on the surface of the wire, within a thickness of a few skin depths. The skin depth is the thickness at which the current density is reduced by 63%. Even at relatively low frequencies used for power transmission (50–60 Hz), non-uniform distribution of current still occurs in sufficiently thick conductors. For example, the skin depth of a copper conductor is approximately 8.57 mm at 60 Hz, so high current conductors are usually hollow to reduce their mass and cost.

Since the current tends to flow in the periphery of conductors, the effective cross-section of the conductor is reduced. This increases the effective AC resistance of the conductor, since resistance is inversely proportional to the cross-sectional area. The AC resistance often is many times higher than the DC resistance, causing a much higher energy loss due to ohmic heating (also called I2R loss).

Techniques for reducing AC resistance

For low to medium frequencies, conductors can be divided into stranded wires, each insulated from one other, and the relative positions of individual strands specially arranged within the conductor bundle. Wire constructed using this technique is called Litz wire. This measure helps to partially mitigate skin effect by forcing more equal current throughout the total cross section of the stranded conductors. Litz wire is used for making high-Q inductors, reducing losses in flexible conductors carrying very high currents at lower frequencies, and in the windings of devices carrying higher radio frequency current (up to hundreds of kilohertz), such as switch-mode power supplies and radio frequency transformers.

As written above, an alternating current is made of electric charge under periodic acceleration, which causes radiation of electromagnetic waves. Energy that is radiated is lost. Depending on the frequency, different techniques are used to minimize the loss due to radiation.

Twisted pairs

At frequencies up to about 1 GHz, pairs of wires are twisted together in a cable, forming a twisted pair. This reduces losses from electromagnetic radiation and inductive coupling. A twisted pair must be used with a balanced signalling system, so that the two wires carry equal but opposite currents. Each wire in a twisted pair radiates a signal, but it is effectively cancelled by radiation from the other wire, resulting in almost no radiation loss.

Coaxial cables

Coaxial cables are commonly used at audio frequencies and above for convenience. A coaxial cable has a conductive wire inside a conductive tube, separated by a dielectric layer. The current flowing on the inner conductor is equal and opposite to the current flowing on the inner surface of the tube. The electromagnetic field is thus completely contained within the tube, and (ideally) no energy is lost to radiation or coupling outside the tube. Coaxial cables have acceptably small losses for frequencies up to about 5 GHz. For microwave frequencies greater than 5 GHz, the losses (due mainly to the electrical resistance of the central conductor) become too large, making waveguides a more efficient medium for transmitting energy. Coaxial cables with an air rather than solid dielectric are preferred as they transmit power with lower loss.

Waveguides

Waveguides are similar to coax cables, as both consist of tubes, with the biggest difference being that the waveguide has no inner conductor. Waveguides can have any arbitrary cross section, but rectangular cross sections are the most common. Because waveguides do not have an inner conductor to carry a return current, waveguides cannot deliver energy by means of an electric current, but rather by means of a guided electromagnetic field. Although surface currents do flow on the inner walls of the waveguides, those surface currents do not carry power. Power is carried by the guided electromagnetic fields. The surface currents are set up by the guided electromagnetic fields and have the effect of keeping the fields inside the waveguide and preventing leakage of the fields to the space outside the waveguide.

Waveguides have dimensions comparable to the wavelength of the alternating current to be transmitted, so they are only feasible at microwave frequencies. In addition to this mechanical feasibility, electrical resistance of the non-ideal metals forming the walls of the waveguide cause dissipation of power (surface currents flowing on lossy conductors dissipate power). At higher frequencies, the power lost to this dissipation becomes unacceptably large.

Fiber optics

At frequencies greater than 200 GHz, waveguide dimensions become impractically small, and the ohmic losses in the waveguide walls become large. Instead, fiber optics, which are a form of dielectric waveguides, can be used. For such frequencies, the concepts of voltages and currents are no longer used.

Mathematics of AC voltages

A sine wave, over one cycle (360°). The dashed line represents the root mean square (RMS) value at about 0.707

Alternating currents are accompanied (or caused) by alternating voltages. An AC voltage v can be described mathematically as a function of time by the following equation:

$v(t)=V_\mathrm{peak}\cdot\sin(\omega t)$,

where

• $\displaystyle V_{\rm peak}$ is the peak voltage (unit: volt),
• $\displaystyle\omega$ is the angular frequency (unit: radians per second)
• The angular frequency is related to the physical frequency, $\displaystyle f$ (unit = hertz), which represents the number of cycles per second, by the equation $\displaystyle\omega = 2\pi f$.
• $\displaystyle t$ is the time (unit: second).

The peak-to-peak value of an AC voltage is defined as the difference between its positive peak and its negative peak. Since the maximum value of $\sin(x)$ is +1 and the minimum value is −1, an AC voltage swings between $+V_{\rm peak}$ and $-V_{\rm peak}$. The peak-to-peak voltage, usually written as $V_{\rm pp}$ or $V_{\rm P-P}$, is therefore $V_{\rm peak} - (-V_{\rm peak}) = 2 V_{\rm peak}$.

Power and root mean square

The relationship between voltage and the power delivered is

$p(t) = \frac{v^2(t)}{R}$ where $R$ represents a load resistance.

Rather than using instantaneous power, $p(t)$, it is more practical to use a time averaged power (where the averaging is performed over any integer number of cycles). Therefore, AC voltage is often expressed as a root mean square (RMS) value, written as $V_{\rm rms}$, because

$P_{\rm time~averaged} = \frac{{V^2}_{\rm rms}}{R}.$

For a sinusoidal voltage:

$V_\mathrm{rms}=\frac{V_\mathrm{peak}}{\sqrt{2}}.$

The factor $\sqrt{2}$ is called the crest factor, which varies for different waveforms.

$V_\mathrm{rms}=\frac{V_\mathrm{peak}}{\sqrt{3}}.$
$\displaystyle V_\mathrm{rms}=V_\mathrm{peak}.$
• For an arbitrary periodic waveform $v(t)$ of period $T$:
$V_\mathrm{rms}=\sqrt{\frac{1}{T} \int_0^{T}{v^2(t) dt}}.$

Example

To illustrate these concepts, consider a 230 V AC mains supply used in many countries around the world. It is so called because its root mean square value is 230 V. This means that the time-averaged power delivered is equivalent to the power delivered by a DC voltage of 230 V. To determine the peak voltage (amplitude), we can rearrange the above equation to:

$V_\mathrm{peak}=\sqrt{2}\ V_\mathrm{rms}.$

For 230 V AC, the peak voltage $\scriptstyle V_\mathrm{peak}$ is therefore $\scriptstyle 230 V \times\sqrt{2}$, which is about 325 V. The peak-to-peak value $\scriptstyle V_\mathrm{P-P}$ of the 230 V AC is double that, at about 650 V.

References

1. ^ N. N. Bhargava and D. C. Kulshreshtha (1983). Basic Electronics & Linear Circuits. Tata McGraw-Hill Education. p. 90. ISBN 978-0-07-451965-3.
2. ^ National Electric Light Association (1915). Electrical meterman's handbook. Trow Press. p. 81.
3. ^ Pixii Machine invented by Hippolyte Pixii, National High Magnetic Field Laboratory
4. ^ Licht, Sidney Herman., "History of Electrotherapy", in Therapeutic Electricity and Ultraviolet Radiation, 2nd ed., ed. Sidney Licht, New Haven: E. Licht, 1967, Pp. 1-70.
5. ^ a b "Stanley Transformer". Los Alamos National Laboratory; University of Florida. Retrieved Jan. 9, 2009.
6. ^ De Fonveille, W. (Jan. 22, 1880). "Gas and Electricity in Paris". Nature 21 (534): 283. Bibcode:1880Natur..21..282D. doi:10.1038/021282b0. Retrieved Jan. 9, 2009.
7. ^ I. Grattan-Guinness, History and Philosophy of the Mathematical Sciences - 2003, Page 1229
8. ^ Jeff Suzuki, Mathematics in Historical Context - 2009, page 329

• Willam A. Meyers, History and Reflections on the Way Things Were: Mill Creek Power Plant – Making History with AC, IEEE Power Engineering Review, February 1997, pages 22–24
 132400 videos foundNext >
 Physical Science 6.3b - DC and ACPhysical Science. Direct Current and Alternating Current. From the Physical Science course by Derek Owens. Alternating Current - A Level PhysicsA description of AC electricity - its sine wave function, generation, power, root mean square, transformers, transmission and rectification. Alternating CurrentThe ups and downs of Alternating Current. Note: the video compression process makes the oscilloscope images a little strange... AC vs DC Explained and How to Use an OscilloscopeExplaining AC and DC is easy if you can use an oscilloscope, how to use an oscilloscope is fairly easy when using AC and DC as examples, it made sense to me ... Alternating Current FundamentalsMost of the electrical equipment used today operates on alternating current (AC). The purpose of this training unit is to review significant terms, concepts,... AC vs DC Power?The story about why DC power systems are returning to common use and how it is happening. Conceptual Physics : Alternating CurrentPaul Hewitt explains how alternating current works. AC MOTORS AND GENERATORSAC MOTORS AND GENERATORS - Department of Defense 1961 - PIN 29943 - DESIGN, OPERATION, AND USE OF SINGLE AND MULTIPHASE AC GENERATORS AND MOTORS - OPERATION ... The Pain of Electricity (AC versus DC)Have you always wondered if you shocked yourself with electricity, which type of electricity would hurt more: AC (Alternating Current) or DC (Direct Current)... Alternating current; RLC circuits (2)Physics: Alternating current (AC) circuits. Root-mean-square (rms) voltage and current. Resistors, capacitors, and inductors in AC circuits; phasor diagrams....
 132400 videos foundNext >
 459 news items
 Honoring the inventor behind alternating current Electric Light & Power (blog) Mon, 06 May 2013 07:56:16 -0700 Credit where it's due is a simple and remarkable thing, although unfortunately history has a way of shortchanging people of it. It's hard to think of a better example of this tendency than one Nikola Tesla — the person who, by rights, ought to be ... RealClearPolitics America No Longer Leads in Nuclear Technology RealClearPolitics Wed, 22 May 2013 03:30:40 -0700 Started in the 19th century by Thomas Edison's rival George Westinghouse, the company prospered when it hired Serbian genius Nikola Tesla and bested Edison in the “War of the Currents” (waged over whether alternating current or direct current was ... EirGrid to hold additional information days Anglo Celt Wed, 22 May 2013 07:19:25 -0700 The “Final Re-evaluation Report” found that there remains an urgent strategic need for the project and recommends that the new interconnector takes the form of a single circuit 400kV alternating current overhead line. In reaching its conclusions ... Swiss PV Company, SolarMax Opens US Office Solar Novus Today Wed, 22 May 2013 07:45:59 -0700 The Atlanta office will allow SolarMax to deliver its Swiss-quality PV inverter product portfolio, including string and central inverters that reliably and efficiently convert direct current into mains-compliant alternating current. SolarMax will ... The 'Strawscraper' has a hairy coat that generates wind power Wired.co.uk Tue, 21 May 2013 04:44:46 -0700 Since sounds are just vibrations of air, piezoelectric generation is often used in ultrasound technology -- if you vibrate a crystal between two metal plates, you'll generate an alternating current at that same frequency, and vice versa. The idea with ... Battery swapping becoming common practice for commercial vehicles Electronics News Tue, 21 May 2013 17:39:55 -0700 In 'conventional' electric vehicles, the battery is charged inside the vehicle as needed, using direct or alternating current. With battery swapping, the drained battery is replaced with a freshly charged one. In the eastern Chinese harbor city of ... Living Green Magazine How Do Solar Power Systems Work? Living Green Magazine Tue, 21 May 2013 06:55:42 -0700 A solar power inverter is an electrical device that changes direct current (DC) from the photovoltaic cells into alternating current (AC) that is used inside a home or building. A solar inverter can be fed directly into the electrical grid or connected ... RedOrbit IGERT's 2013 Video And Posters Competition Kicks Off RedOrbit Tue, 21 May 2013 07:59:00 -0700 While recognized in the scientific world for his contributions to the modern alternating current (AC) system of power delivery, Nikola Tesla is also highly regarded as a scientific showman – performing many electrical demonstrations in front of a live ...
 Limit to books that you can completely read online Include partial books (book previews) .gsc-branding { display:block; }

Oops, we seem to be having trouble contacting Twitter